SEE ALL THE NAUTICAL ITEMS BELOW HERE  

Click on the photo to see additional views of this ship salvaged passageway lamp.

This little light is about 7 inches tall by about 5 inches wide. The base has two mounting lugs that are 3 1/2 inches on center of each other.  To access the bulb, simply spin off the top section of the light.  The cage and globe spin off as one piece.  This light weighs about 3 1/2 pounds. The globe is glass and has a couple of cracks on one side.

This ship salvaged passageway lamp has been rewired with all new UL-listed parts that are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 65 watts or less.

This light was designed for exterior use, but has many interior uses also.

You will be shipped the ship salvaged passageway lamp shown in the photos.

Click on the photo to see additional views of this authentic ship passageway ceiling light.

This nice little light is about 7 inches tall. The widest point of the light is about 5 inches wide. The base has two mounting lugs.  To access the bulb, spin off the top section of the light as one piece.  This light weighs about 3 1/2 pounds. The globe is glass and has a small crack on one side.

This light has been rewired with all new UL-Listed parts that are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 65 watts or less.

This light was designed for exterior use, but has many interior uses also.

You will be shipped the authentic ship passageway ceiling light shown in the photos.

Click on the photo to see additional views of this aluminum wall light with finial.

This aluminum wall light with finial measures about 12″ long, from the round back plate down to the tip of the cage. It will extend out from the mounting surface by about 8 1/2″.  The round mount plate has 4 holes and measures 4″ in diameter.  Total weight is about 3 pounds.

We have installed a new UL-Listed bulb socket and wiring. The wiring and bulb socket are rated to work with any voltage under 250 volts. The new bulb socket takes a normal screw in house bulb of 75 watts or less.

Because this light was recovered from a working vessel, it will have some surface wear.  The globe has a small oyster scuff on the inside which does not affect the light’s use.

You will be shipped the aluminum wall light with finial shown in the photos.

Click on the photo to see additional views of this nautical light.

From the top of the wall mount to the bottom of the cage, this indoor and exterior nautical lighting measures about 8 1/2 inches tall.  When mounted to the wall, this light will extend out by 6 inches.  The wall mount measures 3 inches wide x about 3 1/2 inches tall and has three mount holes.  This light weighs a little over 3 pounds, and is 100% cast brass. The glass globe needs a bit of cleaning up.  You can use this light inside or outside, it will never rust!

We have installed a new wiring (including a ground wire) and a Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.

These make great indoor or exterior lights – on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.

We have made new rubber gaskets to fit the inside housing where the globe sits. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!

Note: There is a crack on the base where the cage screws in and the light has an overall weathered look.

You will be shipped the light shown in the photos.

Click on the photo to see additional views of this cast brass nautical light.

This original cast brass nautical bulkhead light is a little less than perfect. It measures almost 10 inches long from the mount plate down to the tip of the cage, and will extend out from the mounting surface by about 6 1/2 inches. The wall mount is about 4 inches wide, not counting the three mounting legs. The cage spins on and off freely. This light was polished but now has a weathered look. The glass globe could use additional cleaning. The back mount plate is bent.

We have installed a new UL-Listed bulb holder and 6 inches of UL-Listed wire. The wiring and bulb holder is rated to work with any voltage under 250 volts, and the bulb holder accepts a normal screw in light of less than 75 watts. This light weighs just over 5 pounds. Great light for the money!

Note: The mount is bent and the light has a weathered look.

You will be shipped the cast brass nautical light shown in the photos.

Click on the photo to see additional views of this USS Forrestal ship light.

This is an original, unpolished cast brass (yes, it is brass under all that paint!) nautical bulkhead light salvaged from the Navy ship, USS Forrestal.  From the top of the wall box mount to the bottom of the cage it measures about 10 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The one conduit hole on the bottom of the light has been fitted with a copper cap.  The light weighs 10 pounds.

This light has been rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled on the back to allow the wiring to exit the light and not be visible.

This light is in original, as-found condition, paint and all.  It will have some surface wear.  The glass globe is in good shape.  One bar on the cage is missing – see photo.  Won’t affect how the light works.

The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

You will be shipped the USS Forrestal ship light shown in the photos.

Click on the photo to see additional views of this Russian freighter passageway light.

This Russian freighter passageway light is not quite perfect.  From the top of the wall mount to the bottom of the cage area, this light measures about 9 1/2 inches tall.  The back mount plate is triangular in shape and measures 5 1/2 inches at the top x 5 1/4 inches on the two short sides.  The light weighs just over 5 1/2 pounds.

Well weathered from use.  One of the mount holes is broken and there is a chip on the cage.  See close up photos.

We have installed a new bulb holder and wiring that is UL-listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 75 watts or less. Wired to work with any voltage under 250 volts. These lights are great for interior and exterior projects!

You will be shipped the Russian freighter passageway light shown in the photos.

Click on the photo to see additional views of this covered brass nautical ceiling light.

This covered brass nautical ceiling light will extend down from the mount surface by about 9 inches.  An 8 inch brass cover has been added.  It is removable.  The base of the light has three mounting legs.  The original conduit openings on the front have had brass plugs installed.  This light weighs 5 pounds.

This light has been rewired, including a ground wire, and bulb holder.  All parts are UL listed.  The new bulb holder takes a normal screw in house bulb of 75 watts or less.  The new wiring will work with any voltage under 250 volts.

This light has some weathering to the brass.  The cage is slightly bent.

You will be shipped the covered nautical ceiling light shown in the photos.

Click on the photo to see additional views of this covered cast brass ceiling light.

This covered cast brass ceiling light will extend down from the mount surface by about 9 inches.  An 8 inch brass cover has been added.  It is removable.  The base of the light has three mounting legs.  The original conduit openings on the front have had brass plugs installed.  This light weighs 5 pounds.

This light has been rewired, including a ground wire, and bulb holder.  All parts are UL listed.  The new bulb holder takes a normal screw in house bulb of 75 watts or less.  The new wiring will work with any voltage under 250 volts.

This light has some weathering to the brass.  The cage is lightly bent.

You will be shipped the covered cast brass ceiling light shown in the photos.

Click on the photo to see additional views of this small cast brass marine passageway light.

This small passageway light is about 8 inches tall. The widest point of the light is about 5 inches. The base has three mounting lugs.  To access the bulb, the top section of the light unscrews as one piece.  This light weighs about 3 pounds.

This light has been rewired with all new UL-Listed parts that are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 65 watts or less.

You will be shipped the small cast brass marine passageway light shown in the photos.

Click on the photo to see additional images of this Russell and Stoll – Stunning Nautical Light.

Russell and Stoll Manufacturing made a large variety of cast brass nautical lighting starting back during World War II. This 1950 stunning nautical light is what I consider to be a work of art. The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall. The base measures 4 3/4 inches square with the widest section of the light housing measuring almost 7 inches wide. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.

The design of this Russell and Stoll – Stunning Nautical Light  allows it to be used as a ceiling light or as a post light. The watertight construction allows for installations in wet and harsh environment locations. To access the bulb, the top section of the light spins free of the base. The top section that spins off as one piece consists of the cage, the globe, and the large cast bronze section just below the globe.

We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builders plate that includes the Underwriters Laboratory certification.

This original light is a very rare and hard to find piece. Besides being used as a ceiling or post light, this light could have a cord added to it and be used as a very impressive desk or counter top light.

This Item #S-27 <P> Russell and Stoll – Stunning Nautical Light has a cracked cage.

Click on the photo to see additional views of this vintage brass passageway ceiling light.

This vintage brass passageway ceiling light will extend down from the mount surface by about 9 inches.  An 8 inch brass cover has been added.  It is removable.  The base of the light has three mounting legs.  The original conduit openings on the front have had brass plugs installed.  This light weighs 5 pounds.

This light has been rewired, including a ground wire, and bulb holder.  All parts are UL listed.  The new bulb holder takes a normal screw in house bulb of 75 watts or less.  The new wiring will work with any voltage under 250 volts.

This light has some weathering to the brass.  The cage is lightly bent.

You will be shipped the vintage brass passageway ceiling light shown in the photos.

Click on the photo to see additional images of this salvaged Russell and Stoll brass light.

The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall. The base measures 4 3/4 inches square with the widest section of the light housing measuring almost 7 inches wide. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.

The design of this salvaged Russell and Stoll brass light allows it to be used as a ceiling light or as a post light.  A cord can also be added for use as a desk lamp.  The watertight construction works well for installations in wet and harsh environment locations.

We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builder’s plate that includes the Underwriters Laboratory certification.

You will be shipped this salvaged Russell and Stoll brass light shown in the photos.

Click on the photo to see additional views of this vintage ship salvaged passageway lamp.

This vintage ship salvaged passageway lamp is about 7 inches tall. The widest point of the light is about 5 inches wide. The base has two mounting lugs.   The original conduit opening has been fitted with a brass plug.  This light weighs about 3 1/2 pounds.

To access the bulb, spin off the top section of the light as one piece. The globe is glass. This lamp has weathering around the base.

This light has been rewired with all new UL-Listed parts that are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 65 watts or less.

You will be shipped the vintage ship salvaged passageway lamp shown in the photos.

Click on the photo to see additional images of this vintage aluminum nautical porthole mirror 22 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into nautical mirror. The mount ring measures 21 3/4 inches. The mirror measures 15 1/2 inches. One closure dog does not spin off. Weighs about 29 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 5 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this Russell and Stoll post light.

Russell and Stoll Manufacturing made a large variety of cast brass nautical lighting starting back during World War II. This 1950 stunning nautical light is what I consider to be a work of art. The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall x almost 7 inches wide. The base measures 4 3/4 inches square. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.

The design of this monster Russell and Stoll nautical light allows it to be used as a ceiling light or as a post light. The watertight construction allows for installations in wet or harsh environments. To access the bulb, the top section of the light spins free of the base, which consists of the cage, the globe, and the large cast bronze section just below the globe.

We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builder’s plate that includes the Underwriters Laboratory certification.

This original light is a very rare and hard to find piece. Besides being used as a ceiling or post light, this light could have a cord added to it and be used as a very impressive desk or countertop light.

Note: The brass cage does not screw down completely.

You will be shipped the Russell and Stoll post light shown in the photos.

Click on the photo to see additional images of this Russell and Stoll – stunning nautical light with bent cage.

The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall. The base measures 4 3/4 inches square with the widest section of the light housing measuring almost 7 inches wide. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.

We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builder’s plate that includes the Underwriters Laboratory certification.

This original light is a very rare and hard to find piece. Besides being used as a ceiling or post light, this light could have a cord added to it and be used as a very impressive desk or counter top light.

You will be shipped the Russell and Stoll – stunning nautical light with bent cage shown in the photos.

Click on the photo to see additional images of this original aluminum three-dog ships porthole mirror 21 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into the nautical mirror. The mount ring measures about 21 1/4 inches. The glass measures 15 1/2 inches and is original with light wear. One of the closure dogs will not close. Weighs about 25 pounds.

When mounted to the wall, this porthole will extend out a total of about 5 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

Click on the photo to see additional images of this small antique non-opening aluminum ships porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. This porthole mirror does not open. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this small vintage non-opening aluminum nautical porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. This porthole mirror does not open. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this small authentic non-opening aluminum nautical porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. This porthole mirror does not open. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this small salvaged non-opening aluminum nautical porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches, and is slightly uneven. The glass measures 11 1/2 inches. This porthole mirror does not open. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this small original non-opening aluminum nautical porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. This porthole mirror does not open. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this reclaimed non-turning dog aluminum nautical porthole mirror 17 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. One of the closure dogs does not turn, and is permanently open. The other closure dog screws on and off with no problem. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this reclaimed salvaged 17 inch aluminum nautical porthole mirror missing hinge-pin.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. One of the closure dogs does not turn, and is permanently open. The other closure dog screws on and off with no problem. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this antique 17 inch aluminum nautical porthole mirror with non-closing dog.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. One of the closure dogs does not turn, and is permanently open. The other closure dog screws on and off with no problem. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this salvaged 17 inch aluminum nautical porthole mirror with non-opening dog.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 17 inches. The glass measures 11 1/2 inches. One of the closure dogs does not turn, and is permanently closed. The other closure dogs screw on and off with no problem. Weighs about 15 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this vintage aluminum non-opening ships porthole mirror 20 inch diameter.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into nautical mirror. The mount ring measures 19 3/4 inches. The mirror measures 13 1/2 inches. This porthole does not open. Weighs about 26 pounds.

When mounted to the wall, this porthole will extend out a total of about 5 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this salvaged aluminum three-dog 20 inch ships porthole with bent frame.

Nice original aluminum ship’s porthole that has been cleaned and polished. The mount ring measures 19 3/4 inches. The glass measures 13 1/2 inches. All three closure dogs spin on and off with no problems. Weighs about 25 pounds.

The back side of the frame is slightly warped and has a small crack at one of the mount holes (pictured). When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame. The glass is original and may require additional cleaning.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this salvaged aluminum two-dog 20 inch ships porthole with frame damage.

Nice original aluminum ship’s porthole that has been cleaned and polished. The mount ring measures 19 3/4 inches. The glass measures 13 1/2 inches. Both closure dogs spin on and off with no problems. Weighs about 16 pounds.

There is minor damage to the frame at one of the mount holes (pictured). When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame. The glass is original and may require additional cleaning.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this vintage aluminum 20 inch diameter porthole mirror with warped frame.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into nautical mirror. The mount ring measures 19 3/4 inches. The mirror measures 13 1/2 inches. Weighs about 26 pounds. The frame has some minor warping (pictured) which does not affect the function of the porthole.

When mounted to the wall, this porthole will extend out a total of about 5 1/2 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this salvaged 20 inch aluminum nautical porthole mirror with non-opening dog.

Nice original aluminum ship’s porthole that has been cleaned, polished, and made into a nautical mirror. The mount ring measures about 19 3/4 inches. The glass measures 13 1/2 inches. One of the closure dogs does not open, and is permanently closed. Weighs about 26 pounds.

The back side of the frame is smooth. When mounted to the wall, this porthole will extend out a total of about 6 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame.

You will be shipped the aluminum ship’s porthole mirror shown in the photos.

Click on the photo to see additional images of this Antique Aluminum 20 Inch Porthole Non-Opening.

Nice original aluminum ship’s porthole that has been cleaned and polished. The mount ring measures 19 3/4 inches. The glass measures 13 1/2 inches. Weighs about 26 pounds. One of the closure dogs is broken, as such the porthole does not open.

When mounted to the wall, this porthole will extend out a total of about 5 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame. The glass is original, may have minor wear or pitting, and may require additional cleaning.

You will be shipped the aluminum ship’s porthole shown in the photos.

Click on the photo to see additional images of this Antique Aluminum 19 Inch Two-Dog Porthole Frame Damage.

Nice original aluminum ship’s porthole that has been cleaned and polished. There is some damage to the inside of the frame (pictured) which is not visible from the front of the porthole. This does not affect the opening or closing of the porthole. The mount ring measures 19 1/4 inches. The glass measures 13 1/2 inches. Weighs about 16 pounds.

When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame. The glass is original, may have minor wear or pitting, and may require additional cleaning.

You will be shipped the aluminum ship’s porthole shown in the photos.