SEE ALL THE NAUTICAL ITEMS BELOW HERE  

Track Items

Always FREE Shipping in the Continental US

If you love nautical themed decor or just the gleam of polished brass, our brass nautical wall lights and passageway lights will delight you. Our brass bulkhead wall lights have an innovative design that allows them to be used indoors or out, and they come ready to mount.

Some of our brass nautical wall lights are vintage or antique, while others may have some modern parts added. We have brass bulkhead lights that come in matched pairs — ideal for use as front door lights — or in matching sets of 3 or 4. Some of these brass wall lights have red or green glass globes, others have clear glass globes, and many have rain caps in brass or copper. But whichever model you choose, all of our brass nautical light fixtures have been thoroughly updated with new wiring and a Westinghouse UL-Listed bulb fixture.

These brass nautical lights are ideal for use in both interior or exterior projects, and make great lighting for your boathouse or dock. We also carry replacement glass globes for our bulkhead lights, so even though these authentic nautical lights contain both original and recast parts, you can always get the piece you need. Browse our selection of beautiful, authentic brass passageway lights today!

  • Item #P1-01

    Antique Brass Bulkhead Light With Brass Rain Cap

    Price: $185.00

    Click on the photo to see additional photos of this antique brass bulkhead light with brass rain cap.

     From the top of the wall mount of this antique brass bulkhead light with brass rain cap to the bottom of the cage, this light measures 11 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this antique brass bulkhead light will extend out from the wall by 8 inches. This light weighs over 5 pounds, and is 100% cast brass.

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    These antique brass bulkhead lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!

    Quantity: 10 Matched Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-02

    Antique Brass Bulkhead Light w/Copper Rain Cap

    Price: $185.00

    Click on the photo to see additional photos of this antique brass bulkhead light.

     From the top of the wall mount of this antique brass bulkhead light with copper rain cap to the bottom of the cage, this light measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this antique brass bulkhead light will extend out from the wall by 8 inches. This light weighs over 5 pounds, and is 100% cast brass.

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    This antique brass bulkhead light makes great dock lights, boat house lights, front door lights, and they have many interior lighting uses!

    Quantity: 10 Matched Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-03

    Port & Starboard Nautical Bulkhead Lights w/Brass Cover

    Price: $400.00

    Click on the photo to see additional views of the Port & Starboard Nautical Bulkhead Lights w/Brass Cover.

    This is a matched pair of port & starboard nautical bulkhead lights w/brass cover. The globes are true red and green glass. From the top of the wall mount to the bottom of the cage, these port & starboard nautical bulkhead lights w/brass cover measures 11 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this pair of port & starboard nautical bulkhead lights w/brass cover will extend out from the wall by 8 inches. Each light weighs over 5 pounds, and is 100% cast brass. You can use these port & starboard nautical bulkhead lights w/brass cover inside or outside, they will never rust!

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!

    We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!

    Quantity: 1 Pairs In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-04

    Port and Starboard Bulkhead Lights With Copper Cover

    Price: $400.00

    Click on the photo to see additional views of these Port and Starboard Bulkhead Lights With Copper Cover.

    This is a matched pair of cast brass port and starboard bulkhead lights with copper cover. From the top of the wall mount to the bottom of the cage, both port and starboard bulkhead lights with copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this light will extend out from the wall by 8 inches. Each port and starboard bulkhead light with copper cover in this set weighs over 5 pounds, and is 100% cast brass (except the covers).

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!

    Quantity: 1 Pairs In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-05

    Oceanic Brass Wall Light With Junction Box

    Price: $195.00

    Click on the photo to see additional views of the oceanic brass wall light with junction box.

    From the top of the junction box to the bottom of the cage, this oceanic brass wall light measures 10 1/2 inches tall.  When mounted to the wall, this oceanic brass wall light with brass junction box will extend out from the wall by 6 inches. This nautical wall light with brass junction box weighs about 8 pounds, and is 100% cast brass.

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe.

    These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!

    Quantity: 40 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-07

    Extra Large Cast Brass Bulkhead Light With Copper Cover

    Price: $395.00

    Click on the photo to see additional views of this extra large cast brass bulkhead light with copper cover.

    This extra large cast brass bulkhead light with copper cover weighs just over 10 1/2 pounds.  The cover measures 9 inches in diameter. Measuring from the top of the junction box to the bottom of the cage, this extra large cast brass bulkhead light is about 14 inches long. The junction box is 4 1/2 inches in width and has two mounting holes. When mounted to the wall, this light will extend out from the mounting surface by 10 inches.

    The light has been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holder takes a normal screw in house bulb of 75 watts or less. This extra large cast brass bulkhead light can be used for interior or exterior projects – it will never rust.

    Ready to place that order?  Just give us a call at 574-870-1571 and we can get your order on the way.

    Quantity: 6 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-08

    Extra Large Cast Brass Bulkhead Light

    Price: $395.00

    Click on the photo to see additional views of this Extra Large Cast Brass Bulkhead Light.

    Authentic cast brass lights add a one of a kind coastal living look that will again withstand the test of time. You see, we do not sell lights with a brass finish, we sell brass lights!

    This extra large cast brass bulkhead light weighs a little over 11 pounds. We have added a brass deflector cover measuring 9 inches in diameter. Measuring from the top of the junction box to the bottom of the cage this extra large cast brass bulkhead light  it is about 14 inches long. The junction box is 4 1/2 inches in width and has two mounting holes that are about 4 3/4 inches on center. When mounted to the wall, this extra large cast brass bulkhead light will extend out from the mounting surface by 10 inches. The brass cage spins on and off, as does the glass globe.

    The light has been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holder takes a normal screw in house bulb of 75 watts or less. This extra large cast brass bulkhead light can be used for interior or exterior projects, it will never rust.

    We talk to buyers every day that use nautical lights like this for commercial and residential projects. They work well out on the dock or sea wall, and yes, many professional designers use them to create that million dollar look! Call us today and allow us to help you pick the right lights for your project that will last a life time.

    Ready to place that order, just give us a call at 574-870-1571 and we can get those lights on the way.

    Quantity: 9 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-09

    Authentic Cast Brass Wall Mounted Nautical Light

    Price: $139.99

    Click on the photo to see additional views of this authentic cast brass wall mounted nautical light.

    From the top of the wall mount to the bottom of the cage, this authentic cast brass bulkhead wall mounted nautical light measures about 8 1/2 inches tall.  When installed, this authentic cast brass bulkhead wall mounted nautical light will extend out by 6 inches.  The wall mount measures 2 7/8 inches wide x about 3 1/2 inches tall and has three mount holes.  This authentic cast brass wall mounted nautical light weighs about 3 1/2 pounds, and is 100% cast brass. The glass globe is in good condition but may have a slight weathered look.  You can use this light for interior or exterior projects, it will never rust!

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This authentic cast brass wall mounted nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.

    These nautical lights  can be used on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.

    These lights have been polished but will still have a slight weathered look to the brass surface.

    We have been supplying lights to homeowners and design firms for over 15 years. We hand pick lights and other nautical décor items from marine salvage operations around the globe. Needs some custom work done to your lights to make them fit your one of a kind project?  just ask us for a quote. Our in house shop is fully equipped to do most custom projects. Call us at 574-870-1571 and see what we can do for your dream project.

    Several pieces in stock!!

    Quantity: 10 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-10

    Aluminum Wall Light With Cover And Junction Box

    Price: $145.00 $95.00

    Click on the photo to see additional views of this aluminum wall light with cover and junction box.

    This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage.  The aluminum rain cap cover that we added measures 8 inches in diameter.  The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches.  The light weighs almost 3 1/2 pounds.

    We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts.  It will take a normal screw-in house bulb of 75 watts or less.  LED bulbs will also work.

    These lights make great dock lights, boat house lights, or front door lights!  Can be used inside too.  Not recommended for saltwater exposure.

    You will be shipped an aluminum wall light with cover and junction box like the one pictured.

    Quantity: 19 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-14

    Vintage Brass Wall Arm Light With Brass Rain Cap

    Price: $260.00

    Click on the photo to see additional photos of this vintage brass wall arm light with brass rain cap.

     From the top of the curved pipe of this antique brass bulkhead light with brass rain cap to the bottom of the cage, this light measures 15 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 1/2 inches in diameter and has two screw holes. When mounted to the wall, this antique brass light will extend out from the wall by 18 1/2 inches. This light weighs about 8 pounds.

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    These antique brass bulkhead lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!

    Quantity: 5 Matched Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-16

    90 Degree Ship’s Passageway Nautical Light

    Price: $159.99 $149.99

    Click on the photo to see additional views of this great 90 degree ship’s passageway nautical light.

    This 90 degree ship’s passageway nautical light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage, this light measure about 10 inches tall. The wall mount is 3 5/8 inches in diameter and has four mount holes.  It will extend out from the wall by just over 5 1/2 inches. The cage spins on and off freely.

    We have rewired this 90 degree ship’s passageway nautical light with a ground wire and a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    Talk to us about our new brass adaptor plate that will end all of your installation problem with any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light!

    Bigshipsalvage.com is located in Pauline, South Carolina. We have been in the marine salvage business for 15 years. Ready to place an order? Just give us a call at 574-870-1571.

    Quantity: 22 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • ITEM #P1-17

    Vintage Ship Salvaged Hallborn Brass Nautical Light

    Price: $125.00

    Click on the photo to see additional views of this vintage ship salvaged Hallborn brass nautical light.

    This vintage ship salvaged Hallborn brass nautical light measures about 8 1/2 inches long from the back of the mount plate down to the tip of the cage, and will extend out from the mounting surface by about 7 inches. The back mount plate measures 5 1/4 inches wide.  We have installed two copper plugs in the original conduit holes on either side of the light.  This vintage Hallborn brass nautical light weighs almost 5 pounds.

    We have installed a new UL-Listed bulb holder and 6 inches of UL-Listed wire. The wiring and bulb holder is rated to work with any voltage under 250 volts, and the bulb holder accepts a normal screw-in bulb of 75 watts or less.

    You will be shipped the vintage ship salvaged Hallborn brass nautical light shown in the photos.

    Quantity: 32 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-19

    Cast Brass Wall Light With Arm

    Price: $165.00

    Click on the photo to see additional views of this cast brass wall light with arm.

    This is cast brass wall light with arm.  We’ve also added a 10 inch brass cover to dress it up a little.  The light measures a total of about 12 inches long and will extend down about 7 inches.  The triangular mount plate measures 3 inches on each side.  There are three mount holes.  Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each.  The light weighs just over 4 1/2 pounds.

    This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.

    Several pieces in stock.

    Quantity: 39 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-20

    Brass Nautical Dock Light Pauluhn

    Price: $200.00

    Chick on the photo to see additional views of this brass nautical dock light .

    From the top of the mount plate to the bottom of the cage this brass nautical dock light measures about 11 1/2 inches long.  It will extend out from the wall by about 5 inches.  The mount plate measures 4 1/2 inches in diameter with four mount holes.  The light weighs 4 pounds.

    We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts.  The cage and globe unscrew from the main housing to access the bulb holder.  The cage is faintly marked “Pauluhn” on one side.

    Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box.  Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.

    One piece in stock – you will be shipped the brass nautical dock light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-21

    Polished Aluminum Bulkhead Light

    Price: $125.00 $95.00

    Click on the photo to see additional views of this polished aluminum bulkhead light.

    From the top of the wall box mount to the bottom of the cage this polished aluminum bulkhead light measures about 11 1/2 inches tall x 4 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches.  The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches.  This light weighs just under 3 1/2 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw-in house bulb of 75 watts or less.  A new hole was drilled on the back to allow the wiring to exit the light and not be visible.

    This light is not recommended for outside saltwater exposure.

    Several pieces of this polished aluminum bulkhead light in stock.

    Quantity: 22 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-22

    Authentic Russian Freighter Passageway Light

    Price: $160.00

    Click on the photo to see additional views of this authentic Russian freighter passageway light.

    This authentic Russian freighter passageway light has been fully restored.  From the top of the wall mount to the bottom of the cage area, this light measures about 9 1/2 inches tall.  The back mount plate is triangular in shape and measures 5 1/2 inches at the top x 5 1/4 inches on the two short sides.  The light weighs just over 5 1/2 pounds.  Well weathered from use.

    We have installed a new bulb holder and wiring that is UL-listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 75 watts or less. Wired to work with any voltage under 250 volts. These lights are great for interior and exterior projects!

    You will be shipped an authentic Russian freighter passageway light like the one shown in the photos.

    Quantity: 1 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-23

    Salvaged USS Forrestal Bulkhead Light

    Price: $180.00

    Click on the photo to see additional views of this salvaged USS Forrestal bulkhead light.

    This is an original, unpolished cast brass (yes, it is brass under all that paint!) nautical bulkhead light that was salvaged from the Navy ship, USS Forrestal.  Made by Russell & Stoll. From the top of the wall box mount to the bottom of the cage it measures about 10 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The two conduit holes on the sides of the light have been fitted with copper caps.  The light weighs about 10 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled in the center of the wall mount on the back to allow the wiring to exit the light and not be visible.

    This light is in original, as-found condition, paint and all.  It will have some surface wear and you can clean it up or leave it as is.  The glass globe is in good shape and pretty clean.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the salvaged USS Forrestal bulkhead light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-24

    Brass Oceanic Nautical Dock Light

    Price: $200.00

    Chick on the photo to see additional views of this brass Oceanic nautical dock light .

    From the top of the mount plate to the bottom of the cage this brass Oceanic nautical dock light measures about 12 inches long.  It will extend out from the wall by about 5 inches.  The mount plate measures 4 1/2 inches in diameter with four mount holes.  The light weighs just over 4 1/2 pounds.

    We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts.  The cage and globe unscrew from the main housing to access the bulb holder.  The cage is marked “Oceanic” on one side.

    Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box.  Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.

    One piece in stock – you will be shipped the brass Oceanic nautical dock light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-25

    Authentic Nautical Salvaged Ship Light

    Price: $165.00

    Chick on the photo to see additional views of this authentic nautical salvaged ship light.

    From the top of the mount plate to the bottom of the cage this authentic nautical salvaged ship light measures about 10 inches long.  It will extend out from the wall by about 6 1/2 inches.  The mount plate measures 3 7/8 inches in diameter with four mount holes.  The light weighs just over 5 1/2 pounds.

    We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts.  The cage and globe unscrew from the main housing to access the bulb holder.

    Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box.  Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.

    One piece in stock – you will be shipped the authentic nautical salvaged ship light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-27

    USS Forrestal Navy Ship Light

    Price: $180.00

    Click on the photo to see additional views of this USS Forrestal Navy ship light.

    This is an original, unpolished cast brass (yes, it is brass under all that paint!) nautical bulkhead light salvaged from the Navy ship, USS Forrestal.  From the top of the wall box mount to the bottom of the cage it measures about 10 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The one conduit hole on the top of the light has been fitted with a copper cap.  The light weighs just over 10 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled on the back to allow the wiring to exit the light and not be visible.

    This light is in original, as-found condition, paint and all.  It will have some surface wear.  The glass globe is in good shape with some wear.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the USS Forrestal Navy ship light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-28

    Vintage USS Forrestal Ship Light

    Price: $180.00

    Click on the photo to see additional views of this USS Forrestal ship light.

    This vintage USS Forrestal ship light is an original, unpolished cast brass (yes, it is brass under all that paint!) treasure.  Made by Russell & Stoll. From the top of the wall box mount to the bottom of the cage it measures about 10 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The one conduit hole on the side of the light has been fitted with a copper cap.  The light weighs about 10 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled in the center of the wall mount on the back to allow the wiring to exit the light and not be visible.

    This light is in original, as-found condition, paint and all.  It will have some surface wear and you can clean it up or leave it as is.  The glass globe is in good shape and pretty clean.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the vintage USS Forrestal ship light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-29

    Nautical Salvage Brass Ship Light

    Price: $165.00

    Chick on the photo to see additional views of this nautical salvage brass ship light.

    From the top of the mount plate to the bottom of the cage this nautical salvage brass ship light measures about 10 1/2 inches long.  It will extend out from the wall by about 6 inches.  The mount plate measures 3 3/4 inches in diameter with four large mount holes.  This light weighs 4 1/2 pounds.

    We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts.  The cage and globe unscrew from the main housing to access the bulb holder.

    Talk to us about our new brass adapter plate that will end all of your installation problems with any existing in the wall junction box.  Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.

    One piece in stock – you will be shipped the nautical salvage brass ship light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-30

    USS Forrestal Nautical Bulkhead Light

    Price: $180.00

    Click on the photo to see additional views of this USS Forrestal nautical bulkhead light.

    This USS Forrestal nautical bulkhead light is an original, unpolished cast brass (yes, it is brass under all that paint!) treasure.  Made by Russell & Stoll. From the top of the wall box mount to the bottom of the cage this light measures about 9 1/2 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The three conduit holes on the bottom of the light have been fitted with copper caps.  The light weighs just over 10 1/2 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled in the center of the wall mount on the back to allow the wiring to exit the light and not be visible.

    This light is in original, as-found condition, paint and all.  It will have some surface wear and you can clean it up or leave it as is.  The white milk glass globe is in good shape and pretty clean.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the USS Forrestal nautical bulkhead light shown in the photos

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-31

    Vintage Salvaged Brass Ship Light

    Price: $165.00

    Chick on the photo to see additional views of this vintage salvaged brass ship light.

    From the top of the mount plate to the bottom of the cage, this vintage salvaged brass ship light measures about 9 1/2 inches long.  It will extend out from the wall by about 6 1/2 inches.  The mount plate measures 3 5/8 inches in diameter with four large mount holes.  This light weighs nearly 5 1/2 pounds.

    We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts.  The cage and globe unscrew from the main housing to access the bulb holder.

    Talk to us about our new brass adapter plate that will end all of your installation problems with any existing in the wall junction box.  Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.

    One piece in stock – you will be shipped the vintage salvaged brass ship light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-32

    Weathered Cast Brass Bulkhead Light With Brass Cage

    Price: $125.00

    Click on the photo to see additional views of this weathered cast brass bulkhead light with brass cage.

    This is a weathered cast brass bulkhead light with brass cage. It weighs nearly 7 pounds. From the top of the wall mount to the bottom of the cage, the light measures about 8 3/4 inches tall. The wall mount measures 4 inches wide and has four mounting holes that are 2 1/4 inches on center. To access the bulb you spin off the cage and clear glass globe. When mounted to the wall, this weathered cast brass bulkhead light with brass cage will extend out from the wall by about 8 inches.

    Note: The brass cages are not completely polished and will have slight bends.

    The new bulb holder accepts a normal screw in house bulb of 75 watts or less.   It was made by Westinghouse Electric, and has the “UL-Listing” stamp. The new bulb holder, wiring, including a ground wire, is rated to work with any voltage under 250 volts.

    We now stock a specially made 6 inch brass plate that will allow most of our wall or ceiling lights to adapt to nearly any American junction box. Yes, that is right, we have solved all of your mounting issues, and your electrical contractor will love these!  Talk to us about your adapter plate needs – they are $20.00 each.

    Ready to get your order started? or have questions, call us at 574-870-1571.

     

    Quantity: 3 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-33

    Oceanic Cast Brass Ship’s Wall Mounted Passageway Light

    Price: $175.00

    Click on the photo to see additional views of this Oceanic cast brass ship’s wall mounted passageway light.

    From the top of the wall mount to the bottom of the cage this Oceanic cast brass ship’s wall mounted passageway light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs just over 4 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the Oceanic cast brass ship’s wall mounted passageway light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-34

    Oceanic Cast Brass Wall Mounted Passageway Light

    Price: $175.00

    Click on the photo to see additional views of this Oceanic cast brass wall mounted passageway light.

    From the top of the wall mount to the bottom of the cage this Oceanic cast brass wall mounted passageway light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs 4 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the Oceanic cast brass wall mounted passageway light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-35

    Polished Brass Wall Mount Bulkhead Light

    Price: $145.00

    Click on the photo to see additional views of this beautiful polished brass wall mount bulkhead light.

    This polished brass wall mount bulkhead light is constructed of solid cast brass material and weighs 6 pounds. Measuring from the top of the wall mount to the bottom of the cage this polished brass wall mount bulkhead light is 10 inches long. The wall mount is 3 3/4 inches in diameter and has four mount holes. When mounted to the wall this polished brass wall mount bulkhead light will extend out from the mounting surface by about 6 inches. The brass cage easily spins on and off  as does the glass globe. The globe is original.

    This light has been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts and have included a ground wire. The new bulb holder take a normal screw in house bulb of 75 watts or less.

    This polished brass wall mount bulkhead light will never rust! These lights can be considered for your dock lighting, sea wall lighting, and they have many exterior or interior residential or commercial applications as well.

    We also stock a great selection of other nautical antiques and nautical décor for all of your project needs.

    Several pieces of this polished brass wall mount bulkhead light in stock!

    Quantity: 15 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-36

    Oceanic Cast Brass Passageway Light

    Price: $175.00

    Click on the photo to see additional views of this Oceanic cast brass passageway light.

    From the top of the wall mount to the bottom of the cage this Oceanic cast brass passageway light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs just over 3 1/2 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.  We’ve fitted a brass cap on the fixture’s neck as seen in the photo.

    You will be shipped the Oceanic cast brass passageway light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-38

    Small Wall Mounted Nautical Passageway Light

    Price: $120.00

    Click on the photo to see additional views of this small wall mounted nautical passageway light.

    This small wall mounted nautical passageway light is made of cast brass, and weighs just over over 3 pounds. It is 7 inches long and when mounted to the wall it will extend out by 5 inches. The wall mount measures just over 4 3/4 inches wide and has two mount holes.  To access the bulb fixture, unscrew the cage. The glass globe lifts out.

    This light has all new wiring, including a ground wire, and a new UL Listed bulb fixture that holds a normal 65 watt house bulb or less.  Rated for any voltage under 250 volts.

    We have designed a brass adaptor plate that mounts to the back of the light. The plate is 6 inches in diameter and is brass, and will cover nearly any American in the wall junction box.  This makes for a clean installation and provides a more finished look.  The plates are $20 each and if you order the plate with your light, we will attach it at no extra charge.

    Quantity: 145 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-39

    Small Wall Mounted Cast Brass Passageway Light

    Price: $120.00

    Click on the photo to see additional views of this small wall mounted cast brass passageway light.

    This wall mounted cast brass passageway light weighs just a little over 3 pounds. It is 7 inches tall and when mounted to the wall it will extend out by about 5 1/2 inches. The wall mount measures just over 4 inches wide and has two mount holes.

    We have re-wired this light with new wiring, plus a ground wire, and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    One of our most common installation questions is mounting this light to an existing in the wall junction boxes.  We have solved this installation problem by designing a brass adaptor plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box.  This makes for a clean watertight installation and provides a finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.

    Quantity: 69 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-40

    3 Pc Set Weathered Brass Wall Mounted Nautical Navigation Lights

    Price: $395.00

    Click on the photo to see additional views of this three piece set of weathered brass wall mounted nautical navigation lights.

    From the top of the wall mount to the bottom of the cage, each light measures about 8 inches tall. When mounted to the wall, each light will extend out by about 6 inches. The wall mount measures 3 inches wide x 3 1/2 inches tall, with three mount holes.  Each light weighs just over 3 1/2 pounds.

    This three piece set consists of a clear, red port, and green starboard light.  The globes are true red and green glass, not painted!

    We have installed new UL-listed bulb holders and wiring made by Westinghouse Electric.  The new bulb holders take a normal screw in house bulb of 65 watts or less. The wiring and bulb holder will work with any voltage under 250 volts.

    We stock a six inch brass mounting adaptor plate that will ease the installation of these vintage nautical light to a standard in the wall junction box. Our mounting plates add $20.00 to each light – order the plates when you order the lights and we will attach them at no extra charge.

    You will be shipped the weathered brass wall mounted nautical navigation lights shown in the photos.

    Quantity: 1 Set in stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-41

    Wall Mounted Brass Nautical Sconce Light

    Price: $145.00

    Click on the photo to see additional views of this wall mounted brass nautical sconce light.

    Here is a very nice wall mounted brass nautical sconce light. This light is often referred to a passageway light or bulkhead light. This wall mounted brass nautical sconce light is constructed of 100% solid cast brass and has a frosted globe! The light is almost 8 1/2 inches tall if you measure from the top of the wall mount to the bottom of the cage. When mounted to the wall this wall mounted brass nautical sconce light will extend out by about 8 1/4 inches. The wall mount measures 4 inches in diameter and has four mount holes.  The light weighs just about 6 3/4 pounds.

    After removing the paint and polishing this light, we have removed the old wiring and bulb sockets, and installed new. Our wiring and bulb sockets are UL Listed and rated to work with any voltage under 250 volts. The new bulb socket takes a common house bulb of 65 watts or less. The new wiring exits the light from the back of the wall mount so that all wiring is hidden when installed. The light even has a pre-installed ground wire!

    If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adapter plates that we sell for $20.00 each. Our adapter plate will make a water tight connection over the junction box and makes a very clean looking installation.

    We have several pieces of this item number in stock.

    Quantity: 1 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-42

    Oceanic Cast Brass Nautical Light

    Price: $175.00

    Click on the photo to see additional views of this Oceanic cast brass nautical light.

    From the top of the wall mount to the bottom of the cage this Oceanic cast brass nautical light measures 11 inches long. The wall mount is 4 3/8 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs just over 4 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the Oceanic cast brass nautical light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-43

    Solid Brass Small Nautical Bulkhead Light

    Price: $125.00

    Click on the photo to see additional views of this solid brass small nautical bulkhead light .

    From the top of the wall mount to the bottom of the cage, this light measures about 9 inches long.   The wall mount is 3 3/4 inches in diameter and has four mount holes. The light will extend out from the wall about 6 inches.  To access the bulb area, the brass cage spins off and the undamaged glass globe lifts out.  Weighs about 5 pounds.

    We have installed a new bulb holder and wiring that is UL-Listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 50 watts or less. Wired to work with any voltage under 250 volts.  Great for interior and exterior projects!  These lights have some light surface wear.

    If you have an existing junction box in your mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box for a very clean looking installation.  If you order a plate when you order the light, we will install it on the light at no extra charge.

    Quantity: 4 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-44

    Oceanic Cast Brass Wall Light

    Price: $175.00

    Click on the photo to see additional views of this Oceanic cast brass wall light.

    From the top of the wall mount to the bottom of the cage this Oceanic cast brass wall light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs just over 4 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the Oceanic cast brass wall light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-45

    Authentic Oceanic Cast Brass Wall Light

    Price: $175.00

    Click on the photo to see additional views of this authentic Oceanic cast brass wall light.

    From the top of the wall mount to the bottom of the cage this authentic Oceanic cast brass wall light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage is prominently marked “Oceanic”.  Light weighs 4 1/2 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped this authentic Oceanic cast brass wall light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-46

    Salvaged Oceanic Cast Brass Wall Light

    Price: $175.00

    Click on the photo to see additional views of this salvaged Oceanic cast brass wall light.

    From the top of the wall mount to the bottom of the cage this salvaged Oceanic cast brass wall light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage and neck of the fixture is prominently marked “Oceanic”.  Light weighs just over 4 1/2 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped this salvaged Oceanic cast brass wall light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-47

    Original Pauluhn Cast Brass Wall Light

    Price: $175.00

    Click on the photo to see additional views of this original Pauluhn cast brass wall light.

    From the top of the wall mount to the bottom of the cage this original Pauluhn cast brass wall light measures 10 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The cage and base of the fixture is prominently marked “Pauluhn”.  Light weighs nearly 5 pounds.

    The cage has some light bends here and there.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the original Pauluhn cast brass wall light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-48

    Large Impressive Brass Bulkhead Light With Copper Rain Cap

    Price: $395.00

    Click on the photo to see additional photos of this large impressive brass bulkhead light.

    From the top of the wall mount of this large impressive brass bulkhead light with copper rain cap cover to the bottom of the cage, this light measures 14 inches long. The copper rain cap cover that we added measures 9 inches wide and now has a rolled outside edge. The four mounting holes measure 5 1/4 inches on center of each other.  The base itself measures 4 5/8 inches from one side to the other. When mounted to the wall, this large impressive brass bulkhead light will extend out from the wall by 10 inches. This light weighs over 11 pounds, and is 100% cast brass. You can use this light inside or outside – it will never rust!

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    A large impressive brass bulkhead light such as this one will make great dock lights, boat house lights, or front door lights, and also have many interior lighting uses!

    We take great pride in this light design. We have made new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!

    We have a large inventory of these lights in stock!!

    Quantity: 65 Matched Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-49

    Large Antique Brass Bulkhead Light With Brass Rain Cap

    Price: $395.00

    Click on the photo to see additional photos of this beautiful large antique brass bulkhead light.

    From the top of the wall mount of this large antique brass bulkhead light with brass rain cap to the bottom of the cage, this light measures 14 inches long. The brass rain cap cover that we added measures 9 inches wide and now has a rolled outside edge. The four screw holes measure 5 1/4 inches on center of each other.  The base itself measures 4 5/8 inches from one outside edge to the other. When mounted to the wall, this large antique brass bulkhead light will extend out from the wall by 10 inches. This light weighs 11 1/2 pounds, and is 100% cast brass. You can use this light inside or outside – it will never rust!

    We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.

    A large antique brass bulkhead light such as this one makes a great dock light, boat house light, or front door light, and also has many interior lighting uses!

    We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces, if not ends, the problem with bugs and water collecting inside the globe area!

    Several pieces of this very impressive, large antique brass bulkhead light are in stock!!

    Quantity: 54 Matched Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-50

    Wall Mounted Brass Nautical Bulkhead Light

    Price: $120.00

    Click on the photo to see additional views of this wall mounted brass nautical bulkhead light.

    This is a very nice wall mounted brass nautical bulkhead light. This wall mounted brass nautical bulkhead light is constructed of 100% solid cast brass and has a frosted globe! The light is almost 9 inches tall if you measure from the top of the wall mount to the bottom of the cage. When mounted to the wall this wall mounted brass nautical bulkhead light will extend out about 8 1/4 inches. The wall mount measures 4 inches in diameter and has four mount holes that are 2 1/4 inches on center of each other.  The light weighs about 7 pounds.

    Note: The brass cages are not totally polished and have some bends.

    After removing the paint and polishing this light, we have removed the old wiring and bulb sockets, and installed new. Our wiring and bulb sockets are UL Listed and rated to work with any voltage under 250 volts. The new bulb socket takes a common house bulb of 65 watts or less. The new wiring exits the light from the back of the wall mount so that all wiring is hidden when installed. The light even has a pre-installed ground wire!

    If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adapter plates that we sell for $20.00 each. Our adapter plate will make a water tight connection over the junction box and makes a very clean looking installation.

    We have several pieces of this item number in stock.

    Quantity: 25 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-51

    Vintage Pauluhn Cast Brass Sconce Light

    Price: $175.00

    Click on the photo to see additional views of this vintage Pauluhn cast brass sconce light.

    From the top of the wall mount to the bottom of the cage this vintage Pauluhn cast brass sconce light measures 10 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes.  This light will extend out from the wall by 5 inches.  The base of the fixture is prominently marked “Pauluhn”.  Light weighs just over 5 1/2 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the vintage Pauluhn cast brass sconce light shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-52

    2 Salvaged Pauluhn Brass Navigation Sconce Lights

    Price: $325.00

    Click on the photo to see additional views of these 2 salvaged pauluhn brass navigation sconce lights.

    From the top of the wall mount to the bottom of the cage these 2 salvaged pauluhn brass sconce lights measure 10 3/4 inches long. The wall mounts are 4 1/2 inches in diameter and have four mount holes.  These lights will extend out from the wall by 5 1/4 inches. Weigh just over 4 pounds each.

    You can use these lights inside or out – they will never rust! We have rewired these lights to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holders take a common screw in house bulb of 75 watts or less.

    You will be shipped the 2 salvaged pauluhn brass navigation sconce lights shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-53

    Matched Pair Pauluhn Red & Green Navigation Lights

    Price: $325.00

    Click on the photo to see additional views of this matched pair pauluhn red & green navigation lights.

    From the top of the wall mount to the bottom of the cage these original pauluhn lights measure 11 inches long. The wall mounts are 4 1/2 inches in diameter and have four mount holes.  The lights will extend out from the wall by 5 inches.  Each light weighs just over 4 pounds.

    You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the matched pair pauluhn red & green navigation lights shown in the photos.

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-55

    Authentic Port and Starboard Bulkhead Nautical Lights

    Price: $320.00

    Click on the photo to see additional views of this 2 Piece set of authentic Port and Starboard bulkhead nautical lights from the 1950’s. 

    This two piece set of authentic port and starboard bulkhead nautical lights is an excellent option for dock lights, seawall lights, or even interior or exterior lighting. They measure 9 1/2 inches from the top of the mount plate to the base of the cage. The wall mount measures 3 3/4 inches wide with three mount lugs on the outside edge. When mounted to wall this two piece set of authentic port and starboard bulkhead nautical lights will extend out 6 1/2 inches.  Each light weighs about five pounds.

    This pair comes with glass globes in the port and starboard colors (red & green). If your project calls for clear globes, we can change the globes to standard clear for no charge. These lights have been re-wired and a new UL Listed parts. They will work on any voltage under 250 volts and a normal screw in house bulb of 60 watts or less will work.  They are ready to install right out of the box.

    Talk to us about our new brass adaptor plate that will end all of your installation problems with almost any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the lights.

    Only one pair, so you will be shipped the authentic port and starboard bulkhead nautical lights shown in the photos.

    Quantity: 1 Pair in stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-56

    Ship Salvaged Cast Brass Bulkhead Light

    Price: $160.00

    Click on the photo to see additional views of this ship salvaged cast brass bulkhead light .

    This ship salvaged cast brass bulkhead light measures about 11 inches long.  It will extend out from the wall by about 6 inches.  The mount plate measures 4 inches in diameter, with three large mount holes.  This light weighs slightly over 6 pounds.

    We have installed a new bulb holder and wiring that is UL-Listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 75 watts or less. Wired to work with any voltage under 250 volts.  Great for interior and exterior projects!

    If you have an existing junction box in your wall, this light may require one of our specially designed brass adaptor plates for an additional $20.00 each.  These plates are 6 inches in diameter and provide a finished look between the wall and light.  If you order a plate when you order the light, we will install it on the light at no extra charge.

    These lights will have some light surface wear here and there.

    You will be shipped a ship salvaged cast brass bulkhead light similar to the one in the photos.

    Quantity: 34 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-57

    USS Forrestal Navy Bulkhead Light

    Price: $180.00

    Click on the photo to see additional views of this USS Forrestal Navy bulkhead light.

    This USS Forrestal Navy bulkhead light is an original, unpolished cast brass treasure.  Made by Russell & Stoll. From the top of the wall box mount to the bottom of the cage this light measures about 9 1/2 inches tall x 5 inches wide (not including the mount holes). When mounted to the wall it will extend out by about 7 inches. The two conduit holes on the bottom of the light and the one conduit hole on one side have been fitted with copper caps.  The light weighs almost 10 1/2 pounds.

    This light has been totally rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled in the center of the wall mount on the back for the wiring to exit.

    This light is in original, as-found condition, paint and all.  It will have some surface wear.  The glass globe is in good shape and pretty clean.  The cage is slightly bent.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the USS Forrestal Navy bulkhead light shown in the photos

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • ITEM #P1-58

    Vintage Wall Mounted Brass Bulkhead Light

    Price: $165.00

    Click on the photo to see additional views of this vintage wall mounted brass bulkhead light.

    This vintage wall mounted brass bulkhead light is also referred to as a passageway light. From the top of the wall mount to the bottom of the cage, this wall mounted brass nautical light with measures 10 1/2 inches long.  When mounted to the wall, the light will extend out by about 6 inches. The wall mount is about 4 inches in diameter  This light weighs just over 6 pounds and can be used for interior or exterior lighting projects.

    This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less.  To access the bulb, you spin off the cage and the undamaged glass globe drops out.

    Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the light at no extra charge.

    Quantity: 40 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-59

    Unrestored USS Forrestal Bulkhead Light

    Price: $180.00

    Click on the photo to see additional views of this unrestored USS Forrestal bulkhead light.

    This unrestored USS Forrestal bulkhead light is an original, unpolished cast brass treasure.  Made by Russell & Stoll. From the top of the wall box mount to the bottom of the cage this light measures about 9 1/2 inches tall x 5 inches wide (not including the mount holes).  It will extend out from the wall by about 7 inches. The two conduit holes on either side of the light have been fitted with copper caps.  The light weighs just over 10 pounds.

    This light has been rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled in the center of the wall mount on the back for the wiring to exit.

    This light is in original, as-found condition, paint and all.  It will have some surface wear.  The glass globe is in good shape and pretty clean.  The cage is slightly bent.

    The USS Forrestal had a very colorful and long history – just Google her name for an interesting biography.  She was commissioned in 1955 and scrapped in December of 2015.

    You will be shipped the unrestored USS Forrestal bulkhead light shown in the photos

    Quantity: 1 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-60

    Cast Brass Industrial Style Wall Light

    Price: $225.00

    Click on the photo to see additional views of this cast brass industrial style wall light.

    This cast brass industrial style wall light measures about 7 1/2 inches wide, including the closures, x 10 inches long.  It will extend out from the wall by about 5 1/2 inches. The conduit hole on one end has been fitted with a copper cap.  This light weighs about 6 1/2 pounds.

    This light has been rewired, including a ground wire, with all new UL-Listed parts rated for any voltage of 250 volts or less. The new bulb holder takes a normal screw in house bulb of 75 watts or less.  A new hole was drilled on the back on one end for the wiring to exit.

    The light will have some surface wear.  The glass ribbed lens is in good shape and pretty clean.  It can also be used as a ceiling light.

    Several pieces in stock.

    Quantity: 1 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-61

    Matched Pair Polished Cast Brass Navigation Lights

    Price: $325.00

    Click on the photo to see additional views of this matched pair polished cast brass navigation lights.

    This matched pair polished cast brass navigation lights each measures 10 inches long. The wall mounts are 4 1/2 inches in diameter and have three mount holes.  Each light will extend out from the wall by 6 1/2 inches.   Each light weighs about 6 pounds.

    The red and green globes are true colored glass – not painted!!

    Each light has been rewired, including a ground wire. We have also installed new Westinghouse UL-Listed bulb fixtures that are rated for up to 250 volts.  The new bulb holder takes a common screw in house bulb of 75 watts or less.

    You will be shipped the matched pair polished cast brass navigation lights shown in the photos.

    Quantity: 1 Pair In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-63

    Brass Wall Light With Arm

    Price: $165.00

    Click on the photo to see additional views of this brass wall light with arm.

    This is a brass wall light with arm.  We’ve also added a 10 inch brass cover to dress it up a little.  The light measures a total of about 12 inches long and will extend down about 7 inches.  The triangular mount plate measures 3 inches on each side.  There are three mount holes.  Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each.  The light weighs just over 4 1/2 pounds.

    This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.

    Several pieces in stock.

    Quantity: 21 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-64

    Cast Brass Russian Freighter Passageway Light

    Price: $160.00

    Click on the photo to see additional views of this cast brass Russian freighter passageway light.

    From the top of the wall mount to the bottom of the cage area, this light measures about 9 inches tall.  The back mount plate is triangular in shape and measures 5 13/4 inches wide at the bottom x 5 inches in height.  The light weighs 5 1/2 pounds.

    We have installed a new bulb holder and wiring that is UL-listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 75 watts or less. Wired to work with any voltage under 250 volts. These lights are great for interior and exterior projects!

    You will be shipped a cast brass Russian freighter passageway light like the one shown in the photos.

    Quantity: 30 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • ITEM #P1-65

    Polished Aluminum Art Deco Ship Light

    Price: $160.00

    Click on the photo to see additional views of this polished aluminum art deco ship light.

    This stunning polished aluminum art deco ship light is a recent addition to our inventory, salvaged from an ocean liner.  It measures about 10 1/2 inches long x 6 1/8 inches wide.  It will extend out from the mount surface by 4 inches.  The ribbed glass globe is frosted.  This light weighs just under 2 1/2 pounds.

    This light has been totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 75 watts or less.  To access the bulb fixture, merely remove the two screws on the base.

    We have several pieces of this polished aluminum art deco ship light in stock!

    Quantity: 7 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-68

    Authentic Weatherproof Nautical Passageway Light

    Price: $120.00

    Click on the photo to see additional views of this authentic weatherproof nautical passageway light.

    This authentic weatherproof nautical passageway light design is commonly referred to as a bulkhead light in the nautical lighting world. This authentic weatherproof nautical passageway light weighs almost 4 pounds. It is 7 3/4 inches long and when mounted to the wall it will extend out by about 5 inches. The wall mount measures 4 5/8 inches wide and has two mount holes.

    You access the bulb of this authentic weatherproof nautical passageway light by spinning off the cage. The cage holds the undamaged ribbed glass globe in place. We have re-wired this light and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts. We have also added a ground wire.

    Talk to us about our new brass adaptor plate that will end all of your installation problem with any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.

    Ready to get that order placed? Just give us a call at 574-870-1571 and our crew can start getting your lights packed! Most orders shipped the same business day you call us.

    These cast brass lights can be used for interior or exterior projects, they will never rust. We talk to buyers every day that use lights like these for commercial and residential projects. They work well out on the dock or sea wall, and yes, many professional designers use them to create that million dollar look!

    Quantity: 2 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • ITEM #P1-70

    Polished Aluminum Art Deco Wall Light

    Price: $160.00

    Click on the photo to see additional views of this polished aluminum art deco wall light.

    This stunning polished aluminum art deco wall light is a recent addition to our inventory, salvaged from an ocean liner.  It measures about 10 1/2 inches long x 6 1/8 inches wide.  It will extend out from the mount surface by 4 inches.  The ribbed glass globe is clear.  This light weighs just under 2 1/2 pounds.

    This light has been totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 75 watts or less.  To access the bulb fixture, merely remove the two screws on the base.

    We have several pieces of this polished aluminum art deco wall light in stock!

    Quantity: 12 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • ITEM #P1-71

    Small Wall Mounted Brass Nautical Light

    Price: $125.00

    Click on the photo to see additional views of this small wall mounted brass nautical light .

    This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.

    This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.

    This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.

    Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.

    Quantity: 1 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-72

    2 Matched Aluminum Bulkhead Lights

    Price: $200.00

    Click on the photo to see additional views of these 2 matched aluminum bulkhead lights.

    These aluminum wall lights measure 12 inches tall, from the top of the body down to the tip of the cage.  When mounted to the wall, these lights will extend out by 8 1/4 inches.  Each light weighs about 3 pounds.

    We have installed new Westinghouse UL-Listed bulb fixtures and wiring that is rated for up to 250 volts.  It will take a normal screw-in house bulb of 75 watts or less.  LED bulbs will also work. To access the bulb area, the cage unscrews from the top portion of the light.

    These lights make great dock lights, boat house lights, or front door lights!  Can be used inside too.  Not recommended for saltwater exposure.

    You will be shipped the 2 matched aluminum bulkhead lights pictured.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-73

    Vintage Cast Brass Ship Light With Frosted Globe

    Price: $120.00

    Click on the photo to see more views of this vintage cast brass ship light with frosted globe.

    This vintage cast brass ship light with frosted globe measures 8 inches long x 5 inches wide.  When mounted to the wall it will extend out by about 5 inches. The wall mount plate measures about 4 3/4 inches wide and has two mount holes.  The light weighs just over 4 pounds.

    To access the bulb holder, merely spin off the cage and lift out the globe.  The cage and rubber gasket inside hold the undamaged frosted glass globe in place. We have re-wired this light and installed a new UL Listed bulb fixture that can hold a normal 60 watt or less house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    Because the mount area on the back of this light is so narrow, we recommend adding one of our 6 inch diameter brass plates.  It will cover the junction box and make a cleaner looking installation.  This plate is an additional $20.  Order it with the light and we will attach it for you.

    You will be shipped the vintage cast brass ship light with frosted globe shown in the photos.

    Quantity: 5 Piece In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-74

    Small Cast Brass Wall Mounted Light

    Price: $125.00

    Click on the photo to see additional views of this small cast brass wall mounted light.

    This small cast brass wall mounted light weighs just a little over 3 pounds. It is 8 inches tall and when mounted to the wall it will only extend out by about 5 inches. The wall mount measures just over 4 inches wide and has two mount holes that are 3 3/8 inches apart on center. You access the bulb by spinning off the cage. The cage holds the undamaged glass globe in place.

    We have re-wired this light with a ground wire and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    A common installation question deals with mounting to existing junction boxes. Typically the wall mount of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. The adapter plate covers the junction box and allows the light to mount to the existing wall around the junction box. This makes for a more finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach it to your light at no extra charge.

    Quantity: 80 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-75

    Small Cast Brass Wall Light

    Price: $125.00

    Click on the photo to see additional views of this small cast brass wall light.

    This small cast brass wall light weighs just over 3 pounds. It is 7 1/4 inches tall and when mounted to the wall it will only extend out by about 5 inches. The wall mount measures just over 4 inches wide and has two mount holes that are 3 3/8 inches apart on center. You access the bulb fixture by spinning off the cage. The cage holds the undamaged glass globe in place.

    We have re-wired this light with a ground wire and installed a new UL Listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    These antique brass nautical lights were designed to mount directly to a steel wall on the ship, and were never designed to mount to our American in the wall junction boxes. Typically the wall mount of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. The adapter plate covers the junction box and allows the light to mount to the existing wall around the junction box.

    These plates add an additional $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.

    Quantity: 70 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-77

    Small Cast Brass Nautical Wall Light

    Price: $125.00

    Click on the photo to see additional views of this small cast brass nautical wall light.

    This small cast brass nautical wall light weighs just a little over 3 pounds. It is 7 1/2 inches tall and when mounted to the wall it will only extend out by about 5 inches. The wall mount measures just over 4 inches wide and has two mount holes that are 3 3/8 inches apart on center.  Access the bulb fixture by spinning off the cage. The cage holds the undamaged glass globe in place.

    We have re-wired this light with a ground wire and installed a new UL Listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

     This small cast brass nautical wall light can become the perfect option for a bathroom light or a kitchen light. Because the construction is 100% cast brass, this small cast brass nautical wall light can also be used for exterior projects where it can handle the effects of direct saltwater contact.

    Typically the wall mounts of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back side of the light. The plate is 6 inches in diameter and will cover any American in the wall junction box.

    These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.

    Quantity: 17 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-79

    Small Cast Brass Nautical Passageway Light

    Price: $125.00

    Click on the photo to see additional views of this small cast brass nautical passageway light.

    This small cast brass nautical wall light weighs just over 3 pounds. It is 7 1/2 inches tall and when mounted to the wall it will only extend out by about 5 inches. The wall mount measures just over 4 inches wide and has two mount holes that are 3 3/8 inches on center.  Access the bulb fixture by spinning off the cage. The cage holds the undamaged glass globe in place.

    We have re-wired this light with a ground wire and installed a new UL Listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    Typically the wall mounts of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back of the light. The plate is 6 inches in diameter and will cover any American in the wall junction box.

    These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the light to the plate at no extra charge.

    Quantity: 7 Piece(s) In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-80

    Small Nautical Cast Brass Passageway Light

    Price: $125.00

    Click on the photo to see additional views of this small nautical cast brass passageway light.

    This small nautical cast brass passageway light weighs almost 4 pounds. It is 7 1/2 inches tall and when mounted to the wall it will only extend out by about 5 inches. The wall mount measures just over 4 inches in diameter and has two mount holes that are 3 3/4 inches apart on center.

    Access the bulb fixture by twisting off the cage and lifting out the glass globe. We have re-wired this light with all new wiring and installed a new UL Listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    One of our most common installation questions is how to mount to existing junction boxes?  Typically the wall mounts of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back of the light. The plate is 6 inches in diameter and will cover any American in the wall junction box.

    These plates add $20.00 to each light. Order the plate when you order your light, and we will install the plate to your light at no extra charge.

    Quantity: 6 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-83

    Small Maritime Cast Brass Passageway Light

    Price: $125.00

    Click on the photo to see additional views of this small maritime cast brass passageway light.

    This small maritime cast brass passageway light is the perfect option for a bathroom light or a kitchen light. Because the construction is 100% cast brass, this small maritime cast brass passageway light can also be used for exterior projects where it can handle the effects of direct saltwater contact. This small maritime cast brass wall light weighs about 3 3/4 pounds. It is 7 1/4 inches tall and when mounted to the wall it will extend out by about 4 1/2 inches. The wall mount measures 4 1/2 inches wide and has two mount holes that are 3 3/4 inches apart on center.

    Access the bulb fixture by spinning off the cage. The cage holds the undamaged glass globe in place. We have re-wired this light with a ground wire and installed a new UL Listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    One of the most common installation questions deals with mounting to existing in the wall junction boxes. These antique brass nautical lights were designed to mount directly to a steel wall on the ship, and not our American in the wall junction boxes. Typically the wall mounts of these lights are too small, or the mount holes never line up with the junction box holes. We have solved this installation problem by designing a brass adapter plate that mounts to the back side of the light. The plate is 6 inches in diameter and will cover any American in the wall junction box. These plates add $20.00 to each light. Order the plates when you order your lights, and we will attach them at no extra charge.

    Quantity: 9 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-95

    Small Cast Brass Bulkhead Light

    Price: $125.00

    Click on the photo to see additional views of this small cast brass bulkhead light.

    This small cast brass light weighs over 3 pounds. It is 7 1/2 inches tall and when mounted to the wall, it will extend out by about 4 3/4 inches. The wall mount measures just over 4 inches wide and has two mount holes that are 3 3/4 inches apart on center. To access the bulb fixture, just spin off the cage. The cage holds the undamaged glass globe in place.

    We have re-wired this light with a ground wire and installed a new UL listed bulb fixture that holds a normal 60 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.

    Mounting these small lights to existing in the wall junction boxes can be a challenge. These antique brass nautical lights were designed to mount directly to a steel wall on the ship, and not our American in the wall junction boxes. Typically the wall mounts of these lights are too small to cover existing in the wall junction boxes, or the mount holes never line up.

    We have solved this installation problem by designing a brass adapter plate that mounts to the back of the light. The plate is 6 inches in diameter and will cover nearly any American in the wall junction box. This makes for a cleaner looking installation. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach it to the light at no extra charge.

    Quantity: 11 Pieces In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96C

    Two Salvaged Cast Brass Bulkhead Lights Lot-C

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights Lot-C

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These Two Salvaged Cast Brass Bulkhead Lights Lot-C will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights Lot-C already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96D

    Two Salvaged Cast Brass Bulkhead Lights Lot-D

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights Lot-D

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These Two Salvaged Cast Brass Bulkhead Lights Lot-D will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights Lot-D already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96E

    Two Salvaged Cast Brass Bulkhead Lights Lot-E

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights Lot-E.

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These Two Salvaged Cast Brass Bulkhead Lights Lot-E will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights Lot-E already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96F

    Two Salvaged Cast Brass Bulkhead Lights Lot-F

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights Lot-F.

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These Two Salvaged Cast Brass Bulkhead Lights Lot-F will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights Lot-F already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96G

    Two Salvaged Cast Brass Bulkhead Lights – Lot-G

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights – Lot-G

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    Two Salvaged Cast Brass Bulkhead Lights – Lot-G will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights – Lot-G already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96H

    Two Salvaged Cast Brass Bulkhead Lights – Lot-H

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights – Lot-H

    This salvaged cast brass bulkhead light weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These Two Salvaged Cast Brass Bulkhead Lights – Lot-H will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These Two Salvaged Cast Brass Bulkhead Lights – Lot-H already has some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96K

    Two Salvaged Cast Brass Bulkhead Lights Lot K

    Price: $265.00

    Click on the photo to see additional views of these two salvaged cast brass bulkhead lights Lot K.

    These two salvaged cast brass bulkhead lights Lot K weighs in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. This salvaged cast brass bulkhead light will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These salvaged cast brass bulkhead lights will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These two salvaged cast brass bulkhead lights Lot K already has some weathering spots on it, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-96L

    Two Salvaged Cast Brass Bulkhead Lights Lot L

    Price: $265.00

    Click on the photo to see additional views of these Two Salvaged Cast Brass Bulkhead Lights Lot L.

    These two salvaged cast brass bulkhead lights Lot L weigh in at just under 5 pounds. From the top of the wall mount to the bottom of the cage it measures just over 10 inches long. The wall mount is 3 3/4 inches wide and has four mount holes. These two salvaged cast brass bulkhead lights Lot L will extend out from the wall by 6 inches. The cage spins on and off freely. The screw in glass globe is undamaged.

    You can use this light inside or outside, it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less.

    These two salvaged cast brass bulkhead lights Lot L will add a designer look to any project! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location!

    These two salvaged cast brass bulkhead lights Lot L already have some weathering spots on them, as evident in the photos.

    Quantity: 1 Two Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-98

    Authentic Weatherproof Brass Dock Lights With Cages

    Price: $725.00

    Click on the photo to see additional views of these 6 authentic weatherproof brass dock lights with cages.

    Each light measures about 9 1/2 long, from the top of the wall mount to the bottom of the cage.

    The wall mount measures 3 5/8 inches in diameter.

    Extends out from the wall by 6 1/2 inches.

    Each light weighs about 5 1/2 pounds.

    Rewired with new Westinghouse Electrical parts, including ground wires, that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    You will be shipped the six piece set of authentic weatherproof brass dock lights with cages shown in the photos.

    Quantity: 1 Six Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99A

    4 Piece Set Of Authentic Wall Mounted Nautical Brass Lights

    Price: $595.00

    Click on the photo to see additional views of this 4 piece set of authentic wall mounted nautical brass lights.

    These authentic wall mounted brass lights each measures about 10 1/2 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes. When mounted to the wall, these lights will extend out from the mounting surface by about 5 inches.  Each light weighs just over 4 pounds.

    All lights have been re-wired with new Westinghouse Electrical parts.  These parts are UL listed and rated to work with any voltage under 250 volts.  New ground wires have also been installed.  The new bulb sockets take a normal screw in house bulb of 75 watts or less.

    If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adaptor plates that are an additional $20.00 each.  If ordered with the lights, we will install them for you.

    You will be shipped the authentic wall mounted nautical brass lights shown in the photos.

    Quantity: 1 Four Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99B

    4 Matched Salvaged Nautical Lights

    Price: $550.00

    Click on the photo to see additional views of these 4 matched salvaged nautical lights.

    Here’s a nice set of four salvaged nautical lights.  Commonly called bulkhead lights or passageway lights.  Each of these salvaged nautical lights weighs over 4 1/2 pounds. From the top of the mount plate to the bottom of the cage each light measures about 10 inches long. When mounted to the wall these salvaged nautical lights will extend out from the wall by just over 5 1/2 inches. The wall mount measures 3 5/8 inches in diameter and has three mount holes. The cage and globe unscrew to access the bulb area.

    We have re-wired all of these lights, including ground wires, and installed new UL Listed bulb fixtures that hold a normal 75 watt house bulb or less. All of our new wiring and bulb holders are rated for any voltage under 250 volts.  The original glass is a little discolored from constant sea water contact.

    Talk to us about our new brass adaptor plate that will end all of your installation problems with any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the lights at no extra charge.

    You will be shipped the four piece set of salvaged nautical lights shown in the photos.

     

    Quantity: 1 Four Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99C

    6 Brass Wall Mounted Vintage Nautical Cage Lights

    Price: $825.00

    Click on the photo to see additional views of this 6 piece set of wall mounted vintage nautical cage lights.

    Each of these wall mounted vintage nautical cage lights weigh about 5 pounds. Measuring from the top of the wall mount to the bottom of the cage, they are about 10 inches tall. The wall mount is 3 3/4 inches wide and has four mount holes. When mounted to the wall, these wall mounted vintage nautical cage lights will extend out from the mounting surface by about 6 inches. The brass cages spin on and off with just a little effort, as do the glass globes. The globes are original, so you can expect minor surface wear and each and every one may not be a just like the other 5 globes in the set.

    Each of these wall mounted vintage nautical cage lights have been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    Just one 6 piece matched set in stock, so you will be shipped the 6 lights shown. Note the weathering on these lights as they came from a real working vessel.

    If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box and makes a very clean looking installation.

    Just one set in stock, so you will be shipped the 6 piece wall mounted vintage nautical cage lights shown in the photos.

     

    Quantity: 1 Six Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99D

    6 Piece Set Of Solid Cast Brass Nautical Lights

    Price: $825.00

    Click on the photo to see additional views of this 6 piece set of solid cast brass nautical lights.

    Each light measures about 10 inches long – from top of mount plate to bottom of cage.

    Wall mount measures 3 3/4 inches in diameter.

    Extends out from the wall by 6 inches.

    Each light weighs about 5 pounds.

    The lights in this 6 piece set of solid cast brass nautical lights have been re-wired, including ground wires, with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    This light may require one of our specially designed brass adaptor plates that are $20.00 each. Our adaptor plate covers the area over the junction box and gives a more finished look.

    You will be shipped the 6 piece set of solid cast brass nautical lights shown in the photos.

    Quantity: 1 Six Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99E

    6 Piece Set Of Authentic Cast Brass Bulkhead Nautical Lights

    Price: $825.00

    Click on the photo to see additional views of this 6 piece set of authentic cast brass bulkhead nautical lights.

    From the top of the wall mount to the bottom of the cage, each light in this set measures about 9 1/2 inches tall.  The lights in this 6 piece set of authentic cast brass bulkhead nautical lights have wall mounts that measure about 3 5/8 inches in diameter with four mount holes. When mounted to the wall, these lights will extend out by 6 inches. Each light in this six piece set weighs about 5 1/2 pounds.

    Each light has been re-wired with new Westinghouse electrical parts that are UL-listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    If your project is near saltwater, these are a perfect choice because they are constructed of 100% cast brass material and they will never rust!

    Talk to us about our new brass adaptor plate that will end all of your installation problems with your standard junction box.  Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to each light with brass screws and nuts.

    Ready to get that order placed? Just give us a call at 574-870-1571 and we can get things started!

    You will be shipped the 6 piece set of authentic cast brass bulkhead nautical lights shown in the photos.

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99F

    8 Piece Set Of Authentic Nautical Cast Brass Lights

    Price: $1,075.00

    This 8 piece set of authentic nautical brass lights have already been polished and rewired.

    Some lights in this group have a slight weathered look.

    * 9 1/2 inches long, from the top of the wall mount to the bottom of the cage.

    * 3 5/8 inches wall mount with four mount holes.

    *  Extends out from the wall by 6 1/2 inches.

    *  Weight is about 5 1/2 pounds each.

    Rewired with new Westinghouse Electrical parts, including ground wires, that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    You will be shipped the 8 piece set of authentic nautical brass lights shown in the photos.

    Click on the photo to see additional images!

    Quantity: 1 8 Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99G

    10 Piece Set Of Authentic Nautical Cast Brass Lights

    Price: $1,300.00

    This 10 piece set of authentic nautical brass lights have already been polished and rewired.

    Some lights in this have a slight weathered look.

    * 9 1/2 inches long, from the top of the wall mount to the bottom of the cage.

    * 3 5/8 inches wall mount with four mount holes.

    *  Extends out from the wall by 6 1/2 inches.

    *  Weight is about 5 1/2 pounds each.

    Rewired with new Westinghouse Electrical parts, including ground wires, that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    You will be shipped the 10 piece set of authentic nautical brass lights shown in the photos.

    Click on the photo to see additional images!

    Quantity: 1 10 Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99H

    12 Matched Antique Cast Brass Dock Lights

    Price: $1,595.00

    Click on the photo to see additional views of these 12 matched antique cast brass dock lights.

    These lights may have a million miles on them, but after recently being recovered during one our many salvage operations, these brass dock lights are now ready for your project. Authentic cast brass lights right from the deck of a salvage vessel. This set has 12 matched pieces of antique brass dock lights that will give your project a one of a kind coastal living look! You see, we do not sell lights with a brass finish, we sell brass lights, so they will NEVER rust.

    Each brass dock lights in this set weighs nearly 5 pounds. Measuring from the top of the wall mount to the bottom of the cage, they are about 10 inches tall. The wall mount is 3 5/8 inches wide. When mounted to the wall, these brass dock lights will extend out from the mounting surface by 6 inches. The brass cages spin on and off with little effort, as do the glass globes.  Each light has been re-wired with new Westinghouse electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less. While these lights have been polished, they still have a weathered look.

    These cast brass lights can be used for interior or exterior projects, they will never rust. We talk to buyers every day that use lights like this for commercial and residential projects. They work well out on the dock or sea wall, and yes, many professional designers use them create that million dollar look!

    You will be shipped the 12 brass dock lights shown.

    Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Your electrician will love you if you add our custom built adapter plate to this light! Our 6 inch brass adapter plates cost $20.00 each. If you order them at the same time you order your lights, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.

     

    Quantity: 1 Twelve Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99I

    5 Piece Set Of Authentic Cast Brass Bulkhead Nautical Lights

    Price: $685.00

    Click on the photo to see additional views of this 5 piece set of authentic cast brass bulkhead nautical lights.

    From the top of the wall mount to the bottom of the cage, each light in this set measures about 10 inches tall.  The lights in this 5 piece set of authentic cast brass bulkhead nautical lights have wall mounts that measure about 3 5/8 inches in diameter with four mount holes. When mounted to the wall, these lights will extend out by about 5 3/4 inches. Each light in this six piece set weighs about 5 1/2 pounds.

    Each light has been re-wired with new Westinghouse electrical parts that are UL-listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    If your project is near saltwater, these are a perfect choice because they are constructed of 100% cast brass material and they will never rust!

    Talk to us about our new brass adaptor plate that will end all of your installation problems with your standard junction box.  Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to each light with brass screws and nuts.

    Ready to get that order placed? Just give us a call at 574-870-1571 and we can get things started!

    You will be shipped the 5 piece set of authentic cast brass bulkhead nautical lights shown in the photos.

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99J

    12 Matched Antique Cast Brass Dock Lights

    Price: $1,595.00

    Click on the photo to see additional views of these 12 matched antique cast brass dock lights.

    These lights may have a million miles on them, but after recently being recovered during one our many salvage operations, these brass dock lights are now ready for your project. Authentic cast brass lights right from the deck of a salvage vessel. This set has 12 matched pieces of antique brass dock lights that will give your project a one of a kind coastal living look! You see, we do not sell lights with a brass finish, we sell brass lights, so they will NEVER rust.

    Each brass dock lights in this set weighs nearly 5 pounds. Measuring from the top of the wall mount to the bottom of the cage, they are about 10 inches tall. The wall mount is 3 5/8 inches wide. When mounted to the wall, these brass dock lights will extend out from the mounting surface by 6 inches. The brass cages spin on and off with little effort, as do the glass globes.  Each light has been re-wired with new Westinghouse electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less. While these lights have been polished, they still have a weathered look.

    These cast brass lights can be used for interior or exterior projects, they will never rust. We talk to buyers every day that use lights like this for commercial and residential projects. They work well out on the dock or sea wall, and yes, many professional designers use them create that million dollar look!

    You will be shipped the 12 brass dock lights shown.

    Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Your electrician will love you if you add our custom built adapter plate to this light! Our 6 inch brass adapter plates cost $20.00 each. If you order them at the same time you order your lights, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.

     

    Quantity: 1 Twelve Piece Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.

  • Item #P1-99K

    15 Piece Set Of Authentic Nautical Cast Brass Lights

    Price: $2,000.00

    This 15 piece set of authentic nautical brass lights have already been polished and rewired.

    * 9 1/2 inches long, from the top of the wall mount to the bottom of the cage.

    * 3 5/8 inches wall mount with four mount holes.

    *  Extends out from the wall by 6 1/2 inches.

    *  Weight is about 5 1/2 pounds each.

    Rewired with new Westinghouse Electrical parts, including ground wires, that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.

    You will be shipped the 15 piece set of authentic nautical brass lights shown in the photos.

    Click on the photo to see additional images!

    Quantity: 1 Set In Stock

    Call to order now 574-870-1571

    To email us, please click here.