From the top of the ceiling mount to the tip of the cage, this light measures 7 1/2 inches long, and 4 3/4 inches at the widest. The top of the light has three mounting lugs which will require a mounting space about 4 inches wide. The light weighs just under 3 pounds.
We have installed a new bulb holder and wiring that is UL-listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 75 watts or less. Wired to work with any voltage under 250 volts. The wiring exits the light via a hole in the top.
Well weathered from use. The glass globe in this light is angled slightly to the side, unlike our other lights of this type where the globes are straight down. The original rubber gasket has a 1 1/2 inch piece missing, which means this light will not be completely waterproof. There is also a small 1/2 inch hole in the brass ring above the cage. These flaws can be seen in the photos.
For $20 extra, we can add one of our 6 inch brass adaptor plates to this light that should end the frustration of covering an existing junction box.