Vintage Ship Salvaged Passageway Lamp
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this vintage brass passageway ceiling light.
This vintage brass passageway ceiling light will extend down from the mount surface by about 9 inches. An 8 inch brass cover has been added. It is removable. The base of the light has three mounting legs. The original conduit openings on the front have had brass plugs installed. This light weighs 5 pounds.
This light has been rewired, including a ground wire, and bulb holder. All parts are UL listed. The new bulb holder takes a normal screw in house bulb of 75 watts or less. The new wiring will work with any voltage under 250 volts.
This light has some weathering to the brass. The cage is lightly bent.
You will be shipped the vintage brass passageway ceiling light shown in the photos.
Quantity: 1 Piece in Stock
Click on the photo to see additional images of this salvaged Russell and Stoll brass light.
The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall. The base measures 4 3/4 inches square with the widest section of the light housing measuring almost 7 inches wide. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.
The design of this salvaged Russell and Stoll brass light allows it to be used as a ceiling light or as a post light. A cord can also be added for use as a desk lamp. The watertight construction works well for installations in wet and harsh environment locations.
We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builder’s plate that includes the Underwriters Laboratory certification.
You will be shipped this salvaged Russell and Stoll brass light shown in the photos.
Quantity: 1 One piece in stock.
Click on the photo to see additional images of this salvaged aluminum three-dog 20 inch ships porthole with bent frame.
Nice original aluminum ship’s porthole that has been cleaned and polished. The mount ring measures 19 3/4 inches. The glass measures 13 1/2 inches. All three closure dogs spin on and off with no problems. Weighs about 25 pounds.
The back side of the frame is slightly warped and has a small crack at one of the mount holes (pictured). When mounted to the wall, this porthole will extend out a total of about 4 3/4 inches. This is an authentic porthole that was removed from a working vessel. You can expect some minor wear to the surfaces of the frame. The glass is original and may require additional cleaning.
You will be shipped the aluminum ship’s porthole shown in the photos.
Quantity: 1 piece in stock
Click on the photo to see additional views of this authentic ship passageway ceiling light.
This nice little light is about 7 inches tall. The widest point of the light is about 5 inches wide. The base has two mounting lugs. To access the bulb, spin off the top section of the light as one piece. This light weighs about 3 1/2 pounds. The globe is glass and has a small crack on one side.
This light has been rewired with all new UL-Listed parts that are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 65 watts or less.
This light was designed for exterior use, but has many interior uses also.
You will be shipped the authentic ship passageway ceiling light shown in the photos.
Quantity: 1 Piece In Stock