Heavy Brass Nautical Post Light
Quantity: 11 Pieces In Stock
Free Shipping in the continental US
Click on the photos to see additional views of this authentic cast brass nautical post light.
This authentic cast brass nautical post light measures about 11 1/2 inches tall x about 9 1/2 inches wide. The base has three mount “feet” which measure about 2 inches long. This light weighs 19 pounds.
This light has been completely rewired with modern UL-Listed wiring and bulb socket. It takes a common screw in house bulb of 100 watts or less. Parts are rated to work with any electrical voltage under 250 volts. To access the bulb holder, loosen the three wing nuts on top.
The solid cast brass construction of this post light makes it a perfect fit for interior or exterior lighting projects.
You will be shipped the authentic cast brass nautical post light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional images of this Russell and Stoll nautical light.
The heavy construction of this explosion proof light allows this stunning piece to weigh in at just under 21 pounds. Russell and Stoll made this light to measure 13 inches tall. The base measures 4 3/4 inches square with the widest section of the light housing measuring almost 7 inches wide. The undamaged glass globe is about 6 inches tall and has raised ribs on the interior surface that helps magnify the displacement of the light.
To access the bulb, the top section of the light spins free off the base. The top section that spins off as one piece consists of the cage, the globe, and the large cast bronze section just below the globe.
We have installed a new bulb socket made by Westinghouse Electric that is UL-Listed and rated for any voltage under 250 volts. Additionally, we have installed new wiring including a ground wire that exits the light from the center of the base. The original conduit hole on the lower housing as been fitted with a threaded brass plug. The housing on this light has the original builders plate that includes the Underwriters Laboratory certification.
This original light is a very rare and hard to find piece. Besides being used as a ceiling or post light, this light could have a cord added to it and be used as a very impressive desk or counter top light.
We have several matched pieces of this Russell and Stoll light in stock.
Quantity: 100 Pieces In Stock
Click on the photo to see additional views of this vintage weather tight cast brass nautical piling light.
I think it is hard to tell by looking at the photos of this vintage weather tight cast brass nautical piling light, but it weighs just over 17 pounds. While it may not have the typical post designed base that other lights have in this category, it would be a perfect selection if you need a light to sit on top of a pier piling or a stone structure at the end of your driveway.
This weather tight cast brass nautical piling light measures 11 inches tall and at the widest point it measures about 8 inches wide. The heavy duty cast brass base has two mounting legs with holes that are about 7 1/2 inches on center of each other. This weather tight cast brass nautical piling light can be mounted with the glass pointing up or down. In other words, it can also be considered as a very large over head light.
Because of the construction design, this light can withstand direct water spray, and the bulb compartment will remain water tight. To access the bulb, the cage and globe spin off as one piece. This design requires no tools to change the bulb!
Originally the wiring entered one of the two side conduit holes. We have enclosed the original conduit holes with copper caps, and a new hole has been drilled in the center of the base that will allow for a very clean installation. This vintage weather tight cast brass nautical piling light was completely rewired with a new UL-Listed bulb holder that was made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 100 watts or less. The all new wiring is suited for any voltage under 250 volts, so your normal house voltage is no an issue.
This light has a weathered look and the cage will have the normal bends and possible repairs. If you are looking for a true vintage nautical light that looks like it really came from the deck of a working vessel, this is your light!
Quantity: 32 Pieces In Stock
If you would like to see additional photos of this authentic nautical light with stand, just click on the photo.
Looking for that one of a kind piece to add a true coastal living look to your home? This project was created here in our South Carolina workshop. We started out with an original 1950’s Russell and Stoll cast brass nautical light that measures 13 inches tall. The brass light has been mounted to a teak wood grate that measures about 10 1/2 inches square and then attached to an aluminum pedestal. The aluminum pedestal base was then wrapped with 3/8 rope to give that right nautical look.
The finished product stands 46 inches tall. The light was rewired and fitted with a UL-Listed bulb socket that takes a normal screw in house bulb of 100 watts or less. We also installed a new on and off switch that is hidden on the back side of the light. Also on the back side of pedestal base, we installed a 6 foot pre-wired plug. In other words, when you unpack this light from the shipping box, all you need to do is install your bulb and plug is in. One last note, changing the bulb requires no tools, the top section of this light spins on and off very easy.
If you are all about decorating your home with designer quality products that can’t be found at one of those big box stores, I promise you this is the light you for you!
Our in house workshop has build customs lights for movie sets, restaurants, and hotels. Why not shop where the professional shop, and end up with a finished product that will be a focal point of your room.
Placing an order is a easy as picking up the phone and calling us today!
Big Ship Salvage operates a fully stocked warehouse in Pauline, South Carolina. If you see it on our web-site, we have it in stock.
Quantity: 1 Piece ready to ship, but we can build more!