Tranberg Cast Brass Wall Mount Tow Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this original oil burning lantern.
This original oil burning lantern is in “as found condition”. You are buying it just as I found it with the original paint. This original oil burning lantern is complete and is made of iron. The lantern measures 19 inches tall. The flat back side is 8 inches wide. From the back to the curved front it measures 8 1/2 inches. Weight of this original oil burning lantern is about 9 pounds.
I have not tested the burner for leaks, but I do not see any reason why it could not hold oil. No makers’ mark on this one. The globe is clear Fresnel glass with no damage, but it needs cleaned. Constructed of all iron, this original oil burning lantern has surface rust but no holes!
If you haven’t checked out our other pages of inventory, you should!! We have a vast selection of wall and ceiling lights, cargo lights, compasses and telegraphs, fish art, paddles, life rings, and so much more. The best part is everything you see is in stock here in our warehouse. And that means when you place your order, in most cases it can be shipped the same day!! We do not order from catalogs or buy from other dealers and then take weeks to ship your order.
Give us a call at 574-870-1571 to get started!
You will be shipped the original oil burning lantern shown in the photos.
Click on the photo to see additional views of this heavy duty navigation light.
This heavy duty navigation light measures about 11 inches tall including the handle on top x about 12 inches wide. The 360 degree fresnel glass globe is clear with only a few minor scratches here and there.
We’ve added a white electrical cord with plug.
This heavy duty navigation light is made of cast brass and weighs nearly 24 pounds.
To access the bulb area, unscrew the two nuts on the top. This light has been re-wired and a new bulb holder installed. All the new electrical parts we install are UL-Listed and rated to work with any voltage under 250 volts. The bulb holder takes a normal screw in type bulb of 100 watts or less.
You will be shipped the heavy duty navigation light shown in the photos.
Click on the photo to see additional views of this red fresnel lens cast brass wall mount light.
This red fresnel lens cast brass wall mount light measures about 9 1/2 inches tall, not including the wall brackets. It will extend out from the wall by 8 1/2 inches when mounted. It has four mounting brackets on the back. The light weighs 16 pounds.
The glass Fresnel lens is in good shape with a few light edge chips.
We have plugged the original conduit hole with a copper cap, drilled a new hole on the back of the bottom housing, and fitted it with a short piece of copper pipe. You can bring this new pipe into the wall, or fit your junction box with a cover plate and then drill a 1/2 hole that will allow the new pipe to hide the wiring once installed.
We have installed a new UL Listed bulb fixture and wiring. Rated for up to 250 volts. A normal 100 watt or less household or LED bulb will work for this light.
You will be shipped the red fresnel lens cast brass wall mount light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of these huge marine navigation lights.
Here is a most impressive set of three matched double stack marine navigation lights. Each light stands about 25 inches tall and measures about 14 inches wide. Each light weighs about 30 pounds, so the three piece set total weight is around 90 pounds. These marine navigation lights are made of copper and have some brass trim. Each light has two fresnel globes, and they are made of 3/4 inch thick glass. The globes are all in good condition with just some minor edge flaking – no cracks or holes. The globes on the left hand light show a little more weathering than the other two, but this is not a big issue. The top of the left hand light is dented in. This can be beat out, but I will leave that up to the new owners.
The copper housing of each light will have some dents and dings as they are real lights recovered from a salvage yard operation. The port and starboard lights have clear fresnel glass with a red and green colored insert behind the clear glass. When you install bulbs and turn on the power, the red and green will be quite noticeable. We have re-wired all three lights with all new UL-Listed wiring and two new bulb holders in each light. The new electrical parts are rated to work with any voltage under 250 volts. The bulb holders uses a normal screw in house bulb of 75 watts or less. All three marine navigation lights have some surface wear.
You will be shipped the set of three marine navigation lights shown in the photos.