Large Copper Ship Anchor Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this German made oil burning lantern.
This vintage galvanized German made oil burning lantern has a nice weathered look, but no rusting through! It was made by “Ahlemann and Schlatter Bremen”. Most of the housing has surface rust and has been clear coated. The main housing is made from galvanized iron and the top vent cover is made from copper. As shown in the photo to the left, this lantern is 17 inches tall with the top handle in the down position. The fresnel glass lens is in very good condition, but could use some additional cleaning! Not 100% sure, but I would call this a 145 degree lens. This is a flat back housing with the back side being 7 1/2 inches wide. From the curved front of the lantern to the flat back, it looks to measure about 7 1/2 inches. This German made oil burning lantern weighs just over 8 pounds.
The back side of this lantern has a door that gives easy access to the oil burner. The burner assembly looks complete, but it has not been tested for working condition or leaks, and will need some cleaning if you really want to light it up. The oil burner will need a new wick. The back access door has a slight bend in it, and as you can see in the additional photos, it has a small gap at the bottom when closed.
This is an original German made oil burning lantern that was recovered from a salvage yard operation. This lantern may have some minor dents, dings, and scrapes that are not totally visible in the attached photos. The housing does not show any signs of rusting through.
You will be shipped the German made oil burning lantern shown in the photos
Click on the photo to see additional views of this new old stock perko navigation light.
This heavy duty navigation light measures about 15 inches tall including the handle on top x about 11 inches wide. The 180 degree plastic Fresnel lens is clear and in mint condition. Weighs about 10 pounds.
This light is powered by an original black electrical cord with plug, and turns on when plugged in.
To access the bulb area, unscrew the brass top with the handle.
You will be shipped the new old stock perko navigation light shown in the photos.
Click on the photo to see additional views of this vintage single stack anchor light.
This vintage single stack anchor light measures about 8 inches tall x about 9 inches wide. We have installed a brass plug in the old conduit opening in front. There are two handles on this light – on the top and bottom. The light weighs just over 7 pounds.
The clear glass Fresnel lens is in great condition with just one tiny edge chip seen.
This light has a new UL Listed bulb fixture and wiring rated for up to 250 volts. A normal 100 watt or less household or LED bulb will work for this light. To access the bulb fixture, merely unscrew the three thumb screws on the lid.
You will be shipped the vintage single stack anchor light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this 3 piece authentic wall mount navigation light set.
This original 3 piece authentic wall mount navigation light set can be used for interior or exterior projects. Each light in this set weighs nearly 15 pounds. Each light measures about 9 inches tall and about 8 inches wide. The 360 degree fresnel glass globes are in good condition with some light edge chipping. The back of the lights have four mount legs. The top access cover is held closed by a wing nut that works freely.
All new Westinghouse Electric wiring (including a ground wire) and a new bulb holder have been installed. Rated for any voltage under 250 volts are and UL-listed. The original wiring and conduit entered the front junction box. We have plugged the original conduit hole on the side with a copper cap. A new hole was drilled on the bottom housing. A 90-degree brass fitting was added and a copper pipe was installed in this fitting. This new copper pipe extends just past the wall mounts. You can bring this new pipe into the wall, or fit your junction box with a cover plate and then drill a 1/2 hole that will allow the new pipe to hide all the wiring and protect it from the weather.
You will be shipped the 3 piece authentic wall mount navigation light set shown in the photos.
Quantity: 1 Set in stock