Weathered Cast Brass Bulkhead Light With Brass Cage
Quantity: 2 Piece(s) In Stock
Free Shipping in the continental US
Click on the photo to see additional views of these Port and Starboard Bulkhead Lights With Copper Cover.
This is a matched pair of cast brass port and starboard bulkhead lights with copper cover. From the top of the wall mount to the bottom of the cage, both port and starboard bulkhead lights with copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this light will extend out from the wall by 8 inches. Each port and starboard bulkhead light with copper cover in this set weighs over 5 pounds, and is 100% cast brass (except the covers).
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock
Chick on the photo to see additional views of this brass nautical dock light .
From the top of the mount plate to the bottom of the cage this brass nautical dock light measures about 11 1/2 inches long. It will extend out from the wall by about 5 inches. The mount plate measures 4 1/2 inches in diameter with four mount holes. The light weighs 4 pounds.
We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts. The cage and globe unscrew from the main housing to access the bulb holder. The cage is faintly marked “Pauluhn” on one side.
Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.
One piece in stock – you will be shipped the brass nautical dock light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this 6 piece set of authentic cast brass bulkhead nautical lights.
From the top of the wall mount to the bottom of the cage, each light in this set measures just over 10 inches tall. The lights in this 6 piece set of authentic cast brass bulkhead nautical lights have wall mounts that measure about 3 5/8 inches in diameter with four mount holes. When mounted to the wall, these lights will extend out by 6 inches. Each light in this six piece set weighs about 5 1/2 pounds.
Each light has been re-wired with new Westinghouse electrical parts that are UL-listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
If your project is near saltwater, these are a perfect choice because they are constructed of 100% cast brass material and they will never rust!
Talk to us about our new brass adaptor plate that will end all of your installation problems with your standard junction box. Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to each light with brass screws and nuts.
Ready to get that order placed? Just give us a call at 574-870-1571 and we can get things started!
You will be shipped the 6 piece set of authentic cast brass bulkhead nautical lights shown in the photos.
Click on the photo to see additional views of this solid brass small nautical bulkhead light .
From the top of the wall mount to the bottom of the cage, this light measures about 9 inches long. The wall mount is 3 3/4 inches in diameter and has four mount holes. The light will extend out from the wall about 6 inches. To access the bulb area, the brass cage spins off and the undamaged glass globe lifts out. Weighs about 5 pounds.
We have installed a new bulb holder and wiring that is UL-Listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 50 watts or less. Wired to work with any voltage under 250 volts. Great for interior and exterior projects! These lights have some light surface wear.
If you have an existing junction box in your mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box for a very clean looking installation. If you order a plate when you order the light, we will install it on the light at no extra charge.
Quantity: 39 Pieces In Stock