Wall Mounted Brass Nautical Sconce Light
Quantity: 1 Piece(s) In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this three piece set of weathered brass wall mounted nautical navigation lights.
From the top of the wall mount to the bottom of the cage, each light measures about 8 inches tall. When mounted to the wall, each light will extend out by about 6 inches. The wall mount measures 3 inches wide x 3 1/2 inches tall, with three mount holes. Each light weighs just over 3 1/2 pounds.
This three piece set consists of a clear, red port, and green starboard light. The globes are true red and green glass, not painted!
We have installed new UL-listed bulb holders and wiring made by Westinghouse Electric. The new bulb holders take a normal screw in house bulb of 65 watts or less. The wiring and bulb holder will work with any voltage under 250 volts.
We stock a six inch brass mounting adaptor plate that will ease the installation of these vintage nautical light to a standard in the wall junction box. Our mounting plates add $20.00 to each light – order the plates when you order the lights and we will attach them at no extra charge.
You will be shipped the weathered brass wall mounted nautical navigation lights shown in the photos.
Quantity: 1 Set in stock
Chick on the photo to see additional views of this brass nautical dock light .
From the top of the mount plate to the bottom of the cage this brass nautical dock light measures about 11 1/2 inches long. It will extend out from the wall by about 5 inches. The mount plate measures 4 1/2 inches in diameter with four mount holes. The light weighs 4 pounds.
We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts. The cage and globe unscrew from the main housing to access the bulb holder. The cage is faintly marked “Pauluhn” on one side.
Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.
One piece in stock – you will be shipped the brass nautical dock light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of these Port and Starboard Bulkhead Lights With Copper Cover.
This is a matched pair of cast brass port and starboard bulkhead lights with copper cover. From the top of the wall mount to the bottom of the cage, both port and starboard bulkhead lights with copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this light will extend out from the wall by 8 inches. Each port and starboard bulkhead light with copper cover in this set weighs over 5 pounds, and is 100% cast brass (except the covers).
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock