Vintage Wall Mounted Brass Bulkhead Light
Quantity: 36 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this vintage brass oceanic bulkhead light.
This vintage brass oceanic bulkhead light is about 11 inches tall. The junction box is 4 1/4 inches wide with two mounting lugs. This light is going to extend out from the wall by about 6 1/2 inches when mounted. The light manufacturer’s name, “OCEANIC” is cast into the cage of the light.
This vintage brass oceanic bulkhead light has been run through our shop where it was totally rewired with all new UL-Listed wiring and bulb socket. Our new wiring is rated for any voltage under 250 volts, and has a pre-installed ground wire so it can be installed in a wet location. The new bulb socket accepts a common screw in house bulb of 75 watts or less. To access the bulb, you just spin off the cage and then spin off the undamaged glass globe.
Quantity: 15 Pieces In Stock
Chick on the photo to see additional views of this brass nautical dock light .
From the top of the mount plate to the bottom of the cage this brass nautical dock light measures about 11 1/2 inches long. It will extend out from the wall by about 5 inches. The mount plate measures 4 1/2 inches in diameter with four mount holes. The light weighs 4 pounds.
We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts. The cage and globe unscrew from the main housing to access the bulb holder. The cage is faintly marked “Pauluhn” on one side.
Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.
One piece in stock – you will be shipped the brass nautical dock light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of the Port & Starboard Nautical Bulkhead Lights w/Brass Cover.
This is a matched pair of port & starboard nautical bulkhead lights w/brass cover. The globes are true red and green glass. From the top of the wall mount to the bottom of the cage, these port & starboard nautical bulkhead lights w/brass cover measures 11 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this pair of port & starboard nautical bulkhead lights w/brass cover will extend out from the wall by 8 inches. Each light weighs over 5 pounds, and is 100% cast brass. You can use these port & starboard nautical bulkhead lights w/brass cover inside or outside, they will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock
Click on the photo to see additional views of this small wall mounted nautical passageway light.
This small wall mounted nautical passageway light is made of cast brass, and weighs just over over 3 pounds. It is 7 inches long and when mounted to the wall it will extend out by 5 inches. The wall mount measures just over 4 3/4 inches wide and has two mount holes. To access the bulb fixture, unscrew the cage. The glass globe lifts out.
This light has all new wiring, including a ground wire, and a new UL Listed bulb fixture that holds a normal 65 watt house bulb or less. Rated for any voltage under 250 volts.
We have designed a brass adaptor plate that mounts to the back of the light. The plate is 6 inches in diameter and is brass, and will cover nearly any American in the wall junction box. This makes for a clean installation and provides a more finished look. The plates are $20 each and if you order the plate with your light, we will attach it at no extra charge.
Quantity: 55 Pieces In Stock