USS Forrestal Nautical Bulkhead Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this small wall mounted brass nautical light .
This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.
This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.
Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.
Quantity: 1 Pieces In Stock
Click on the photo to see additional views of this oceanic large neck heavy nautical wall light.
This oceanic large neck heavy nautical wall light is an extremely rare find. This impressive light weighs just over 9 pounds! From the top of the junction box to the bottom of the cage, it measures 10 1/2 inches. This light will extend out from the wall by 7 inches. The junction box measures 4 5/8 inches in diameter and has 2 mounting lugs. The cage and globe unscrew from the main housing to access the bulb holder.
We have re-wired this light, including a ground wire, and installed a new UL Listed bulb fixture that holds a normal 75 watt house bulb.
This light has seen many years of action at sea and show some weathering.
You will be shipped the oceanic large neck heavy nautical wall light shown in the photos.
Ready to get that order placed? Just give us a call at 574-870-1571. Most orders ship the same business day.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this 6 piece set of solid cast brass nautical lights.
Each light measures about 10 inches long – from top of mount plate to bottom of cage.
Wall mount measures 3 3/4 inches in diameter.
Extends out from the wall by 6 inches.
Each light weighs about 5 pounds.
The lights in this 6 piece set of solid cast brass nautical lights have been re-wired, including ground wires, with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
This light may require one of our specially designed brass adaptor plates that are $20.00 each. Our adaptor plate covers the area over the junction box and gives a more finished look.
You will be shipped the 6 piece set of solid cast brass nautical lights shown in the photos.
Quantity: 1 Six Piece Set In Stock
Click on the photo to see additional views of this vintage brass oceanic bulkhead light.
This vintage brass oceanic bulkhead light is about 11 inches tall. The junction box is 4 1/4 inches wide with two mounting lugs. This light is going to extend out from the wall by about 6 1/2 inches when mounted. The light manufacturer’s name, “OCEANIC” is cast into the cage of the light.
This vintage brass oceanic bulkhead light has been run through our shop where it was totally rewired with all new UL-Listed wiring and bulb socket. Our new wiring is rated for any voltage under 250 volts, and has a pre-installed ground wire so it can be installed in a wet location. The new bulb socket accepts a common screw in house bulb of 75 watts or less. To access the bulb, you just spin off the cage and then spin off the undamaged glass globe.
Quantity: 15 Pieces In Stock