Small Cast Brass Nautical Wall Light
Quantity: 17 Piece(s) In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this vintage brass oceanic bulkhead light.
These vintage brass oceanic bulkhead lights are about 11 inches tall. The junction box is 4 1/4 inches wide with two mounting lugs. This light is going to extend out from the wall by about 6 1/2 inches when mounted. The light manufacturer’s name, “OCEANIC” is cast into the cage of the light.
This vintage brass oceanic bulkhead light has been run through our shop where it was totally rewired with all new UL-Listed wiring and bulb socket. Our new wiring is rated for any voltage under 250 volts, and has a pre-installed ground wire so it can be installed in a wet location. The new bulb socket accepts a common screw in house bulb of 75 watts or less. To access the bulb, you just spin off the cage and then spin off the undamaged glass globe.
Quantity: 97 Pieces In Stock
Click on the photo to see additional views of this three piece set of weathered brass wall mounted nautical navigation lights.
From the top of the wall mount to the bottom of the cage, each light measures about 8 inches tall. When mounted to the wall, each light will extend out by about 6 inches. The wall mount measures 3 inches wide x 3 1/2 inches tall, with three mount holes. Each light weighs just over 3 1/2 pounds.
This three piece set consists of a clear, red port, and green starboard light. The globes are true red and green glass, not painted!
We have installed new UL-listed bulb holders and wiring made by Westinghouse Electric. The new bulb holders take a normal screw in house bulb of 65 watts or less. The wiring and bulb holder will work with any voltage under 250 volts.
We stock a six inch brass mounting adaptor plate that will ease the installation of these vintage nautical light to a standard in the wall junction box. Our mounting plates add $20.00 to each light – order the plates when you order the lights and we will attach them at no extra charge.
You will be shipped the weathered brass wall mounted nautical navigation lights shown in the photos.
Quantity: 1 Set in stock
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of the oceanic brass wall light with junction box.
From the top of the junction box to the bottom of the cage, this oceanic brass wall light measures 10 1/2 inches tall. When mounted to the wall, this oceanic brass wall light with brass junction box will extend out from the wall by 6 inches. This nautical wall light with brass junction box weighs about 8 pounds, and is 100% cast brass.
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
Quantity: 21 Pieces In Stock