6 Piece Set Of Solid Cast Brass Nautical Lights
Quantity: 1 Six Piece Set In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of this small wall mounted nautical passageway light.
This small wall mounted nautical passageway light is made of cast brass, and weighs just over over 3 pounds. It is 7 inches long and when mounted to the wall it will extend out by 5 inches. The wall mount measures just over 4 3/4 inches wide and has two mount holes. To access the bulb fixture, unscrew the cage. The glass globe lifts out.
This light has all new wiring, including a ground wire, and a new UL Listed bulb fixture that holds a normal 65 watt house bulb or less. Rated for any voltage under 250 volts.
We have designed a brass adaptor plate that mounts to the back of the light. The plate is 6 inches in diameter and is brass, and will cover nearly any American in the wall junction box. This makes for a clean installation and provides a more finished look. The plates are $20 each and if you order the plate with your light, we will attach it at no extra charge.
Quantity: 55 Pieces In Stock
Click on the photo to see additional views of this nautical wall light with brass junction box & copper cover.
From the top of the wall mount to the bottom of the cage, this nautical bulkhead wall light with brass junction box & copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The two wall mount lugs on the backside of the brass junction box are 5 inches on center of each other. When mounted to the wall, this nautical wall light with brass junction box & copper cover will extend out from the wall by 10 inches. This nautical wall light with brass junction box & copper cover weighs nearly 9 pounds, and is 100% cast brass.
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
Quantity: 10 Pieces In Stock
Click on the photo to see additional views of this authentic cast brass wall mounted nautical light.
From the top of the wall mount to the bottom of the cage, this authentic cast brass bulkhead wall mounted nautical light measures about 8 1/2 inches tall. When installed, this authentic cast brass bulkhead wall mounted nautical light will extend out by 6 inches. The wall mount measures 2 7/8 inches wide x about 3 1/2 inches tall and has three mount holes. This authentic cast brass wall mounted nautical light weighs about 3 1/2 pounds, and is 100% cast brass. The glass globe is in good condition but may have a slight weathered look. You can use this light for interior or exterior projects, it will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This authentic cast brass wall mounted nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.
These nautical lights can be used on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.
These lights have been polished but will still have a slight weathered look to the brass surface.
We have been supplying lights to homeowners and design firms for over 15 years. We hand pick lights and other nautical décor items from marine salvage operations around the globe. Needs some custom work done to your lights to make them fit your one of a kind project? just ask us for a quote. Our in house shop is fully equipped to do most custom projects. Call us at 574-870-1571 and see what we can do for your dream project.
Several pieces in stock!!
Quantity: 20 Pieces In Stock