6 Piece Set Of Authentic Cast Brass Bulkhead Nautical Lights
Free Shipping in the continental US
Click on the photo to see additional views of this authentic cast brass wall mounted nautical light.
From the top of the wall mount to the bottom of the cage, this authentic cast brass bulkhead wall mounted nautical light measures about 8 1/2 inches tall. When installed, this authentic cast brass bulkhead wall mounted nautical light will extend out by 6 inches. The wall mount measures 2 7/8 inches wide x about 3 1/2 inches tall and has three mount holes. This authentic cast brass wall mounted nautical light weighs about 3 1/2 pounds, and is 100% cast brass. The glass globe is in good condition but may have a slight weathered look. You can use this light for interior or exterior projects, it will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This authentic cast brass wall mounted nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.
These nautical lights can be used on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.
These lights have been polished but will still have a slight weathered look to the brass surface.
We have been supplying lights to homeowners and design firms for over 15 years. We hand pick lights and other nautical décor items from marine salvage operations around the globe. Needs some custom work done to your lights to make them fit your one of a kind project? just ask us for a quote. Our in house shop is fully equipped to do most custom projects. Call us at 574-870-1571 and see what we can do for your dream project.
Several pieces in stock!!
Quantity: 20 Pieces In Stock
Click on the photo to see additional views of this vintage brass oceanic bulkhead light.
These vintage brass oceanic bulkhead lights are about 11 inches tall. The junction box is 4 1/4 inches wide with two mounting lugs. This light is going to extend out from the wall by about 6 1/2 inches when mounted. The light manufacturer’s name, “OCEANIC” is cast into the cage of the light.
This vintage brass oceanic bulkhead light has been run through our shop where it was totally rewired with all new UL-Listed wiring and bulb socket. Our new wiring is rated for any voltage under 250 volts, and has a pre-installed ground wire so it can be installed in a wet location. The new bulb socket accepts a common screw in house bulb of 75 watts or less. To access the bulb, you just spin off the cage and then spin off the undamaged glass globe.
Quantity: 97 Pieces In Stock
Click on the photo to see additional views of this aluminum wall light with cover and junction box.
This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage. The aluminum rain cap cover that we added measures 8 inches in diameter. The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches. The light weighs almost 3 1/2 pounds.
We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts. It will take a normal screw-in house bulb of 75 watts or less. LED bulbs will also work.
These lights make great dock lights, boat house lights, or front door lights! Can be used inside too. Not recommended for saltwater exposure.
You will be shipped an aluminum wall light with cover and junction box like the one pictured.
Quantity: 17 Pieces In Stock
Click on the photo to see additional views of this 6 piece set of wall mounted vintage nautical cage lights.
Each of these wall mounted vintage nautical cage lights weigh about 5 pounds. Measuring from the top of the wall mount to the bottom of the cage, they are about 10 inches tall. The wall mount is 3 3/4 inches wide and has four mount holes. When mounted to the wall, these wall mounted vintage nautical cage lights will extend out from the mounting surface by about 6 inches. The brass cages spin on and off with just a little effort, as do the glass globes. The globes are original, so you can expect minor surface wear and each and every one may not be a just like the other 5 globes in the set.
Each of these wall mounted vintage nautical cage lights have been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
Just one 6 piece matched set in stock, so you will be shipped the 6 lights shown. Note the weathering on these lights as they came from a real working vessel.
If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box and makes a very clean looking installation.
Just one set in stock, so you will be shipped the 6 piece wall mounted vintage nautical cage lights shown in the photos.
Quantity: 1 Six Piece Set In Stock