Vintage Cast Brass Ceiling Light w/Small Cover
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this vintage nautical ceiling light with brass deflector cover.
This original nautical ceiling light with brass deflector cover will extend down from the mount surface by about 9 inches. To access the bulb, you spin off the brass cage and the glass globe. The top of the nautical ceiling light with brass deflector cover has three mounting legs. The cover is removable.
The new bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled an exit hole on the top of the light that allows the wiring to not be seen after installation. The new wiring will work with any voltage under 250 volts. The two conduit holes on the front of the light have had brass plugs installed.
Give us a call at 574-870-1571 to order this nautical ceiling light with brass deflector cover in stock.
Quantity: 2 Pieces in Stock
Click on the photo to see additional views of this ceiling light w/small cover.
This light measures about 11 1/2 inches tall, and the added brass deflector cover is about 14 inches in diameter with some weathering.
The light weighs about 20 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three mount holes.
This light is re-wired, including a ground wire. The bulb socket is UL-Listed. Rated to work under 250 volts. It takes a common screw in house bulb of 75 watts or less.
The bulb socket can be accessed by removing the three wing nuts on the lid and opening it.
You will be shipped the ceiling light w/small cover shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this nautical hanging light with brass deflector cap.
We started out with a common ceiling mounted cast brass nautical light and made it into this classy looking vintage reclaimed nautical pendant light with brass deflector cover ready to hang with 2 1/2 feet of brass chain. We added the 8 inch brass deflector cover to greatly change the look. The light measures about 13 inches long, from the tip of the handle to the bottom of the cage. It weighs about 7 pounds. Originally this light had a steel conduit pipe attached to the side to supply the electrical power. We removed the conduit and plugged the hole with a threaded brass cap.
We then added the brass handle at the top of the nautical pendant light with brass deflector cover to polish it all off. All the old wiring and bulb holder was removed and new UL-Listed parts were re-installed that are rated to work with any voltage under 250 volts. The new bulb holder takes an Edison base bulb of 50 watts or less. To access the bulb, you just spin off the brass cage and the undamaged glass globe.
This nautical hanging light with brass deflector cap will be shipped with 2 1/2 feet of chain and wire, but you will need to supply the means to attach to your ceiling.
We have five pieces like this in stock, however they are not all identical and there may be some variation between pieces.
Quantity: 5 Matched Pieces
You can see additional views of this hanging pendant light by clicking on the photo.
This vintage nautical hanging pendant light is about 17 inches tall measuring from the bottom of the cage to the top of the hanging loop. There is 4 feet of chain at the top, which can be shortened or lengthened. The brass rain cap measures 12 1/2 inches in diameter. The light weighs about 27 pounds.
These nautical lights have been totally rewired with all UL-Listed wiring and a porcelain bulb holder. They can take a normal screw in house bulb of 100 watts or less. The new wiring includes a ground wire and exits the light from the center of the light. The new wiring is rated to work with any voltage under 250 volts.
Several pieces in stock!!
Quantity: 7 Pieces In Stock