Engine Room Ceiling Light w/Brass Deflector Cover
Quantity: 1 One piece in stock.
Free Shipping in the continental US
Click on the photo to see additional views of this cast brass nautical ceiling light and cover.
This light measures about 11 inches tall and the added brass deflector cover is about 20 inches in diameter.
The light weighs about 23 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three mount holes.
Re-wired, including a ground wire, and has a bulb socket that is UL-Listed and rated to work with any voltage under 250 volts. It takes a common screw in house bulb of 75 watts or less. The bulb socket can be accessed by removing the three thumb screws on the cover and opening it.
You will be shipped the cast brass nautical ceiling light and cover shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this engine room ceiling light w/brass deflector cover.
This is an original engine room ceiling light to which we added the 8 inch wide brass deflector cover. This cast brass light will extend down from the ceiling by just about 9 inches when mounted. The cage spins on and off freely. The undamaged glass globe threads into the top section of the light.
The engine room ceiling light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. We have also included a ground wire. The bulb holder takes a normal screw in house bulb of 75 watts or less, or you can use the newer compact fluorescent bulbs or LED lights with an Edison base.
This engine room ceiling light weighs about 5 1/2 pounds and can be used for interior or exterior lighting projects. The base of the light has three mounting legs. You will need a mounting surface that is about 6 inches wide. The original conduit holes have been fitted with threaded brass plugs and a new hole has been drilled on the top side to allow the wiring to exit right into the ceiling.
This is a used engine room ceiling light that was recovered during one our many different salvage operations. It will have minor surface wear from being used on a working vessel.
Quantity: 15 + Matched Pieces
You can see additional views of this hanging pendant light by clicking on the photo.
This vintage nautical hanging pendant light is about 17 inches tall measuring from the bottom of the cage to the top of the hanging loop. There is 4 feet of chain at the top, which can be shortened or lengthened. The brass rain cap measures 12 1/2 inches in diameter. The light weighs about 27 pounds.
These nautical lights have been totally rewired with all UL-Listed wiring and a porcelain bulb holder. They can take a normal screw in house bulb of 100 watts or less. The new wiring includes a ground wire and exits the light from the center of the light. The new wiring is rated to work with any voltage under 250 volts.
Several pieces in stock!!
Quantity: 7 Pieces In Stock
Click on the photo to see additional views of this nautical ceiling light with deflector cover.
We have taken an original cast brass engine room/passageway light and added the 7 inch brass deflector cover to make this very unique look. When mounted to the ceiling this light will extend down about 8 1/2 inches. The two ceiling mount holes are 5 1/4 inches on center of each other. A hole has been drilled in the base of the light for the wires to feed through.
We have re-wired this light using new UL-Listed parts rated for any voltage under 250 volts. The new bulb holder takes a normal screw in house bulb of 75 watts or less. The light weighs almost 6 1/2 pounds.
Note: The brass cage is slightly misaligned relative to the glass globe (see photos).
You will be shipped the nautical ceiling light shown in the photos.
Quantity: 1 Piece in Stock