Brass Hanging Light With Copper Deflector Cap
Quantity: 5 Matched Pieces
Free Shipping in the continental US
Click on the photo to see additional views of this vintage nautical ceiling light.
This ceiling light measures about 11 inches tall and the added brass deflector cover is about 20 inches in diameter.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter.
The light weighs about 25 pounds.
The ceiling mount has three mount holes that are about 4 3/4 inches on center of each other.
This light is re-wired, including a ground wire, and has a porcelain bulb socket that is UL-Listed. Rated to work with any voltage under 250 volts. It takes a common screw in house bulb of 75 watts or less.
The bulb socket can be accessed by removing the three thumb screws to open the cover.
Note: One leg is slightly bent.
You will be shipped the vintage nautical ceiling light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this beautiful reclaimed polished brass pendant light.
We started out with a reclaimed brass nautical ceiling light. Once the original light was polished, we fitted it with an 8 1/4 inch wide polished brass deflector cover. The center hole on the top housing was threaded and a brass down rod was added. The down rod has a 3 1/4 inch ceiling mount plate with three mounting holes. This reclaimed polished brass pendant light will extend down from the ceiling about 14 inches and the total weight is about 4 1/2 pounds.
This reclaimed polished brass pendant light was then totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 65 watts or less. To access the bulb, the deflector cover and undamaged glass globe spin off separately.
Great looking pendant light! When mounted, the light must point downward to avoid getting moisture inside the globe.
Please give us a call at 574-870-1571 to order this item number. And as always, shipping is free here in the continental US!
We have several pieces of this reclaimed polished brass pendant light in stock!
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of this large cast brass nautical pendant light with green and white porcelain shade.
This creation shows our ability to recover, salvage, and rebuild vintage nautical lights. This pendant light started out with a 1950’s vintage cast brass nautical light that was made by Russell and Stoll in the mid 1950’s. The green and white porcelain cover on this pendant light originally had some sort of cast aluminum housing and hung directly from a ship as a galley light. The bracket of this pendant light that is used to attach the chain was custom cast for us from broken nautical lights that were no longer useable.
This custom built cast brass pendant light is 18 inches tall (not counting the chain) and the green and white porcelain cover is 18 inches wide. It comes with 3 feet of chain, but more can be ordered if needed. To access the bulb, the cage and globe thread off as one piece. The green and white porcelain cover is held in place by the cage threaded back in place. The porcelain cover will have some chipping like the photos show.
This light has been completely rewired with UL-Listed parts made by Westinghouse Electric. The bulb socket takes a normal screw in house bulb of 100 watts or less. The wiring is rated for any voltage under 250 volts. We have also installed a copper ground wire.
Total weight including three feet of chain is just about 30 pounds. The weight is mostly the cast brass light that we started with.
Several pieces in stock.
Quantity: 5 Pieces In Stock
You can see additional views of this hanging pendant light by clicking on the photo.
This vintage nautical hanging pendant light is about 17 inches tall measuring from the bottom of the cage to the top of the hanging loop. There is 4 feet of chain at the top, which can be shortened or lengthened. The brass rain cap measures 12 1/2 inches in diameter. The light weighs about 27 pounds.
These nautical lights have been totally rewired with all UL-Listed wiring and a porcelain bulb holder. They can take a normal screw in house bulb of 100 watts or less. The new wiring includes a ground wire and exits the light from the center of the light. The new wiring is rated to work with any voltage under 250 volts.
Several pieces in stock!!
Quantity: 7 Pieces In Stock