Authentic Cast Brass Nautical Ceiling Light With Deflector Cover
Quantity: 1 Piece in Stock
Free Shipping in the continental US
Click on the photo to see additional views of this nautical light with red globe.
This is a cast brass ceiling nautical light with red globe. It weighs just over 6 1/2 pounds and measures 7 1/2 inches tall. The mounting base is 4 7/8 inches wide including the 2 mount holes. The globe is red glass and undamaged.
We have installed all new wiring and a bulb holder made by Westinghouse and has the UL-Listed marks. The wiring and bulb holder are rated to work with any voltage under 250 volts for indoor and exterior lighting use. The bulb holder takes a normal screw in house bulb of 60 watts or less.
The light must point downward when installed to prevent moisture from getting inside the fixture.
This is the only one in stock so you will be shipped the nautical light with red globe shown in the photos.
Quantity: 1 piece in stock
Click on the photo to see additional views of this ceiling light w/small cover.
This light measures about 11 1/2 inches tall, and the added brass deflector cover is about 14 inches in diameter with some weathering.
The light weighs about 20 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three mount holes.
This light is re-wired, including a ground wire. The bulb socket is UL-Listed. Rated to work under 250 volts. It takes a common screw in house bulb of 75 watts or less.
The bulb socket can be accessed by removing the three wing nuts on the lid and opening it.
You will be shipped the ceiling light w/small cover shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this beautiful brass ships engine room ceiling light.
We started out with a reclaimed original nautical ceiling light. Once the original light was polished, we fitted it with an 8 inch wide polished brass deflector cover. On the back of the light, there is a conduit box with two holes on either side where the light attached to the ships electrical system. The original conduit holes were then fitted with threaded brass plugs. This ceiling light will extend down from the ceiling about 8 3/4 inches. Total weight is just over 7 pounds. This light fixture will require a mounting surface that is at least 6 3/4 inches by 5 1/2 inches.
The brass ships engine room light was then totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 65 watts or less. To access the bulb, the brass cage and glass globe spin off freely to reveal the bulb area.
Great looking ceiling light! This light is solid brass and will never rust!
You will be shipped the light is the photographs.
Please give us a call at 574-870-1571 to order this item number.
Quantity: 35 Pieces In Stock
Click on the photo to see additional views of this large cast brass nautical pendant light with green and white porcelain shade.
This creation shows our ability to recover, salvage, and rebuild vintage nautical lights. This pendant light started out with a 1950’s vintage cast brass nautical light that was made by Russell and Stoll in the mid 1950’s. The green and white porcelain cover on this pendant light originally had some sort of cast aluminum housing and hung directly from a ship as a galley light. The bracket of this pendant light that is used to attach the chain was custom cast for us from broken nautical lights that were no longer useable.
This custom built cast brass pendant light is 18 inches tall (not counting the chain) and the green and white porcelain cover is 18 inches wide. It comes with 3 feet of chain, but more can be ordered if needed. To access the bulb, the cage and globe thread off as one piece. The green and white porcelain cover is held in place by the cage threaded back in place. The porcelain cover will have some chipping like the photos show.
This light has been completely rewired with UL-Listed parts made by Westinghouse Electric. The bulb socket takes a normal screw in house bulb of 100 watts or less. The wiring is rated for any voltage under 250 volts. We have also installed a copper ground wire.
Total weight including three feet of chain is just about 30 pounds. The weight is mostly the cast brass light that we started with.
Several pieces in stock.
Quantity: 5 Pieces In Stock