Vintage Nautical Ceiling Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this beautiful brass ships engine room ceiling light.
We started out with a reclaimed original nautical ceiling light. Once the original light was polished, we fitted it with an 8 inch wide polished brass deflector cover. On the back of the light, there is a conduit box with two holes on either side where the light attached to the ships electrical system. The original conduit holes were then fitted with threaded brass plugs. This ceiling light will extend down from the ceiling about 8 3/4 inches. Total weight is just over 7 pounds. This light fixture will require a mounting surface that is at least 6 3/4 inches by 5 1/2 inches.
The brass ships engine room light was then totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 65 watts or less. To access the bulb, the brass cage and glass globe spin off freely to reveal the bulb area.
Great looking ceiling light! This light is solid brass and will never rust!
You will be shipped the light is the photographs.
Please give us a call at 574-870-1571 to order this item number.
Quantity: 35 Pieces In Stock
You can see additional views of this hanging pendant light by clicking on the photo.
This vintage nautical hanging pendant light is about 17 inches tall measuring from the bottom of the cage to the top of the hanging loop. There is 4 feet of chain at the top, which can be shortened or lengthened. The brass rain cap measures 12 1/2 inches in diameter. The light weighs about 27 pounds.
These nautical lights have been totally rewired with all UL-Listed wiring and a porcelain bulb holder. They can take a normal screw in house bulb of 100 watts or less. The new wiring includes a ground wire and exits the light from the center of the light. The new wiring is rated to work with any voltage under 250 volts.
Several pieces in stock!!
Quantity: 7 Pieces In Stock
Click on the photo to see additional views of this large round cast brass ceiling light.
This large round cast brass ceiling light measures about 14 inches long, including the junction box on the front x about 10 inches wide. It will extend down from the mounting surface by about 6 inches. The back has three mounting legs. It weighs 11 1/2 pounds.
To access the bulb, you need only to unscrew the three thumbscrews around the outside edge of the light. The cover is hinged. The glass in this light is frosted. The original rubber seal was in poor condition so we replaced it with a rope one.
We have installed a new UL-Listed bulb socket and wiring, including a ground wire. The wiring and bulb socket are rated to work with any voltage under 250 volts. The bulb socket takes a normal screw-in house bulb of 75 watts or less.
This large round cast brass ceiling light can be used for interior or exterior projects and will provide a long life even in a saltwater environment.
We have several pieces of this large round cast brass ceiling light in stock.
Quantity: 12 Pieces In Stock
Click on the photo to see additional views of this large Pauluhn ceiling light
Here we have this interesting large Pauluhn ceiling light. Made of cast brass. This light measures about 8 1/2 inches tall x about 6 inches wide. Beautiful teal blue ribbed globe. This light is marked “Pauluhn Electric Mfg. Co. Pearland, TX”. The single conduit hole was fitted with a brass cap. Weighs a hefty 9 pounds!!
The new bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled a small hole in the base of the light for the wiring to exit and not be seen after installation. The new wiring will work with any voltage under 250 volts and includes a ground wire. Remove the four screws on the cage to access the bulb holder.
This light can also be used as a piling or post light as it is weatherproof.
You will be shipped the large Pauluhn ceiling light shown in the photos.
Quantity: 1 Piece In Stock