Nautical Ceiling Light With Brass Deflector Cover
Quantity: 2 Pieces in Stock
Free Shipping in the continental US
Click on the photo to see additional views of this cast brass nautical ceiling light and cover.
This light measures about 11 inches tall and the added brass deflector cover is about 20 inches in diameter.
The light weighs about 23 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three mount holes.
Re-wired, including a ground wire, and has a bulb socket that is UL-Listed and rated to work with any voltage under 250 volts. It takes a common screw in house bulb of 75 watts or less. The bulb socket can be accessed by removing the three thumb screws on the cover and opening it.
You will be shipped the cast brass nautical ceiling light and cover shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this nautical ceiling light with deflector cover.
We have taken an original cast brass engine room/passageway light and added the 7 inch brass deflector cover to make this very unique look. When mounted to the ceiling this light will extend down about 8 1/2 inches. The two ceiling mount holes are 5 1/4 inches on center of each other. A hole has been drilled in the base of the light for the wires to feed through.
We have re-wired this light using new UL-Listed parts rated for any voltage under 250 volts. The new bulb holder takes a normal screw in house bulb of 75 watts or less. The light weighs almost 6 1/2 pounds.
Note: The brass cage is slightly misaligned relative to the glass globe (see photos).
You will be shipped the nautical ceiling light shown in the photos.
Quantity: 1 Piece in Stock
Click on the photo to see additional views of this beautiful reclaimed polished brass pendant light.
We started out with a reclaimed brass nautical ceiling light. Once the original light was polished, we fitted it with an 8 1/4 inch wide polished brass deflector cover. The center hole on the top housing was threaded and a brass down rod was added. The down rod has a 3 1/4 inch ceiling mount plate with three mounting holes. This reclaimed polished brass pendant light will extend down from the ceiling about 14 inches and the total weight is about 4 1/2 pounds.
This reclaimed polished brass pendant light was then totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 65 watts or less. To access the bulb, the deflector cover and undamaged glass globe spin off separately.
Great looking pendant light! When mounted, the light must point downward to avoid getting moisture inside the globe.
Please give us a call at 574-870-1571 to order this item number. And as always, shipping is free here in the continental US!
We have several pieces of this reclaimed polished brass pendant light in stock!
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of this unusual Pauluhn ceiling light
This is a rather unusual Pauluhn ceiling light. Made of cast brass. This light measures about 8 1/2 inches tall x 6 inches wide. Beautiful teal blue ribbed globe. The top ring of the fixture is marked “Pauluhn Electric Mfg. Co. Pearland, TX”. The single conduit hole in front was fitted with a copper cap. Weighs a hefty 8 1/2 pounds!!
The new bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled a small hole in the base of the light for the wiring to exit and not be seen after installation. The new wiring will work with any voltage under 250 volts and includes a ground wire. Remove the four screws on the cage to access the bulb holder.
This light can also be used as a piling or post light as it is weatherproof.
You will be shipped the unusual Pauluhn ceiling light shown in the photos.
Quantity: 1 Piece In Stock