Engine Room Ceiling Light w/Brass Deflector Cover
Quantity: 1 One piece in stock.
Free Shipping in the continental US
Click on the photo to see additional views of this nautical ceiling light with frosted globe.
This is an original cast brass nautical ceiling light with a frosted globe. We added the 8 inch wide brass deflector cover to dress it up a little. This cast brass nautical ceiling light will extend down from the ceiling by just about 8 inches when mounted. The base of the light has two mounting holes that are almost 4 inches on center of each other. Weighs about 7 pounds. The cage spins on and off freely and holds the frosted glass globe in place as well as the deflector cover. The deflector cover is removable.
The light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less, or you can use the newer compact fluorescent bulbs or LED lights with an Edison base.
This cast brass nautical ceiling light with frosted globe can be used for interior or exterior lighting projects. The original conduit holes have been fitted with threaded brass plugs and a new hole has been drilled in the base to allow the wiring to exit into the ceiling.
Several pieces in stock!!
Quantity: 3 Pieces In Stock
Click on the photo to see additional views of this authentic nautical ceiling light with cover.
This light measures about 11 inches tall and the added brass deflector cover is about 14 inches in diameter.
The light weighs about 20 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three holes that are about 4 3/4 inches on center of each other.
This light is re-wired, including a ground wire. The porcelain bulb socket is UL-Listed. Rated to work under 250 volts. It takes a common screw in house bulb of 75 watts or less.
Access the bulb socket by removing the three wing nuts on the lid to open.
You will be shipped the authentic nautical ceiling light with cover shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this hanging nautical pendant light.
This hanging nautical pendant light measures about 13 inches long, from the tip of the handle to the bottom of the cage. We have added a 12 inch brass cover to complete the look and dress the light up a bit. The light has 4 feet of brass chain for hanging. Originally this light had conduit pipe attached to the side to supply the electrical power. We plugged the old conduit holes with copper caps. This light weighs just under 7 1/2 pounds.
The light has been rewired with all new UL-Listed wiring and a bulb fixture that are rated to work with any voltage under 250 volts. The new bulb holder can take an ordinary house or LED bulb of 100 watts or less.
You will be shipped a hanging nautical pendant light like what is shown in the photos.
Quantity: 9 Matched Pieces
Click on the photo to see additional views of this vintage nautical ceiling light with brass deflector cover.
This original nautical ceiling light with brass deflector cover will extend down from the mount surface by about 9 inches. To access the bulb, you spin off the brass cage and the glass globe. The top of the nautical ceiling light with brass deflector cover has three mounting legs. The cover is removable.
The new bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled an exit hole on the top of the light that allows the wiring to not be seen after installation. The new wiring will work with any voltage under 250 volts. The two conduit holes on the front of the light have had brass plugs installed.
Give us a call at 574-870-1571 to order this nautical ceiling light with brass deflector cover in stock.
Quantity: 2 Pieces in Stock