Brass Hanging Light With Copper Deflector Cap
Quantity: 5 Matched Pieces
Free Shipping in the continental US
Click on the photo to see additional views of this vintage brass maritime ceiling light.
We have taken this vintage brass maritime ceiling light and added the 8 inch brass deflector cover to dress it up a little. We also covered the two original conduit holes on the sides with threaded brass plugs. Freshly polished and rewired, this light is ready to hang as soon as you unpack it from our shipping box.
When mounted to the ceiling, this vintage brass maritime ceiling light will extend down by about 9 1/2 inches. To access the bulb, you spin off the brass cage and the glass globe. The base of the light has three mounting legs. The deflector cover is mounted to the cage with three screws, so if for some reason you do not want the deflector cover, it is removable.
The Westinghouse UL listed wiring and bulb holder will work with any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled a small hole in the base of the light for the wiring to feed through so it will not be visible when installed.
We have a great inventory of maritime antiques, nautical ceiling lights, and more vintage nautical décor. Just give us a call at 574-870-1571 to order!
Two pieces in stock!!
Quantity: 2 Pieces In Stock
Click on the photo to see additional views of this nautical hanging light with brass deflector cap.
We started out with a common ceiling mounted cast brass nautical light and made it into this classy looking vintage reclaimed nautical pendant light with brass deflector cover ready to hang with 2 1/2 feet of brass chain. We added the 8 inch brass deflector cover to greatly change the look. The light measures about 13 inches long, from the tip of the handle to the bottom of the cage. It weighs about 7 pounds. Originally this light had a steel conduit pipe attached to the side to supply the electrical power. We removed the conduit and plugged the hole with a threaded brass cap.
We then added the brass handle at the top of the nautical pendant light with brass deflector cover to polish it all off. All the old wiring and bulb holder was removed and new UL-Listed parts were re-installed that are rated to work with any voltage under 250 volts. The new bulb holder takes an Edison base bulb of 50 watts or less. To access the bulb, you just spin off the brass cage and the undamaged glass globe.
This nautical hanging light with brass deflector cap will be shipped with 2 1/2 feet of chain and wire, but you will need to supply the means to attach to your ceiling.
We have five pieces like this in stock, however they are not all identical and there may be some variation between pieces.
Quantity: 1 Matched Pieces
Click on the photo to see additional views of this large Pauluhn ceiling light
Here we have this interesting large Pauluhn ceiling light. Made of cast brass. This light measures about 8 1/2 inches tall x about 6 inches wide. Beautiful teal blue ribbed globe. This light is marked “Pauluhn Electric Mfg. Co. Pearland, TX”. The single conduit hole was fitted with a brass cap. Weighs a hefty 9 pounds!!
The new bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled a small hole in the base of the light for the wiring to exit and not be seen after installation. The new wiring will work with any voltage under 250 volts and includes a ground wire. Remove the four screws on the cage to access the bulb holder.
This light can also be used as a piling or post light as it is weatherproof.
You will be shipped the large Pauluhn ceiling light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this vintage brass nautical ceiling light with cover.
This light measures about 11 inches tall and the added brass deflector cover is about 20 inches in diameter.
The light weighs about 22 1/2 pounds.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter and has minor edge flaking.
The ceiling mount has three mount holes.
Re-wired, including a ground wire, and has a bulb socket that is UL-Listed and rated to work with any voltage under 250 volts. It takes a common screw in house bulb of 75 watts or less. The bulb socket can be accessed by removing the three thumb screws on the cover and opening it.
You will be shipped the vintage brass nautical ceiling light with cover shown in the photos.
Quantity: 1 Piece In Stock