Ceiling Light w/Small Cover
Quantity: 1 Piece In Stock
Free Shipping in the continental US
You can see additional views of this hanging pendant light by clicking on the photo.
This vintage nautical hanging pendant light is about 17 inches tall measuring from the bottom of the cage to the top of the hanging loop. There is 4 feet of chain at the top, which can be shortened or lengthened. The brass rain cap measures 12 1/2 inches in diameter. The light weighs about 27 pounds.
These nautical lights have been totally rewired with all UL-Listed wiring and a porcelain bulb holder. They can take a normal screw in house bulb of 100 watts or less. The new wiring includes a ground wire and exits the light from the center of the light. The new wiring is rated to work with any voltage under 250 volts.
Several pieces in stock!!
Quantity: 7 Pieces In Stock
Click on the photo to see additional views of this vintage nautical ceiling light.
This ceiling light measures about 11 inches tall and the added brass deflector cover is about 20 inches in diameter.
The 360 degree glass Fresnel lens measures about 8 1/2 inches in diameter.
The light weighs about 25 pounds.
The ceiling mount has three mount holes that are about 4 3/4 inches on center of each other.
This light is re-wired, including a ground wire, and has a porcelain bulb socket that is UL-Listed. Rated to work with any voltage under 250 volts. It takes a common screw in house bulb of 75 watts or less.
The bulb socket can be accessed by removing the three thumb screws to open the cover.
Note: One leg is slightly bent.
You will be shipped the vintage nautical ceiling light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this covered brass engine room ceiling light.
This is an original covered brass engine room ceiling light to which we added the 10 inch wide brass deflector cover. This light will extend down from the ceiling by 8 inches when mounted. The two original conduit openings on the front have been fitted with brass plugs. This light weighs nearly 5 pounds.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. We have also included a ground wire. The bulb holder takes a normal screw in house bulb of 75 watts or less, or you can use the newer compact fluorescent bulbs or LED lights with an Edison base.
This is a beautiful light that can be used inside or outside.
Quantity: 10 + Matched Pieces
Click on the photo to see additional views of this large cast brass nautical pendant light with green and white porcelain shade.
This creation shows our ability to recover, salvage, and rebuild vintage nautical lights. This pendant light started out with a 1950’s vintage cast brass nautical light that was made by Russell and Stoll in the mid 1950’s. The green and white porcelain cover on this pendant light originally had some sort of cast aluminum housing and hung directly from a ship as a galley light. The bracket of this pendant light that is used to attach the chain was custom cast for us from broken nautical lights that were no longer useable.
This custom built cast brass pendant light is 18 inches tall (not counting the chain) and the green and white porcelain cover is 18 inches wide. It comes with 3 feet of chain, but more can be ordered if needed. To access the bulb, the cage and globe thread off as one piece. The green and white porcelain cover is held in place by the cage threaded back in place. The porcelain cover will have some chipping like the photos show.
This light has been completely rewired with UL-Listed parts made by Westinghouse Electric. The bulb socket takes a normal screw in house bulb of 100 watts or less. The wiring is rated for any voltage under 250 volts. We have also installed a copper ground wire.
Total weight including three feet of chain is just about 30 pounds. The weight is mostly the cast brass light that we started with.
Several pieces in stock.
Quantity: 5 Pieces In Stock