Cast Brass Pauluhn Texas Ceiling Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this vintage brass maritime ceiling light.
We have taken this vintage brass maritime ceiling light and added the 8 inch brass deflector cover to dress it up a little. We also covered the two original conduit holes on the sides with threaded brass plugs. Freshly polished and rewired, this light is ready to hang as soon as you unpack it from our shipping box.
When mounted to the ceiling, this vintage brass maritime ceiling light will extend down by about 9 1/2 inches. To access the bulb, you spin off the brass cage and the glass globe. The base of the light has three mounting legs. The deflector cover is mounted to the cage with three screws, so if for some reason you do not want the deflector cover, it is removable.
The Westinghouse UL listed wiring and bulb holder will work with any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less. We drilled a small hole in the base of the light for the wiring to feed through so it will not be visible when installed.
We have a great inventory of maritime antiques, nautical ceiling lights, and more vintage nautical décor. Just give us a call at 574-870-1571 to order!
Two pieces in stock!!
Quantity: 2 Pieces In Stock
Click on the photo to see additional views of this brass hanging light with copper deflector cap.
We started out with a common ceiling mounted cast brass nautical light and made it into this classy looking pendant light ready to hang with 2 1/2 feet of brass chain. We added the 8 inch copper deflector cover to greatly change the look. The light measures about 13 inches long, from the tip of the handle to the bottom of the cage. It weighs about 7 pounds. Originally this light had a steel conduit pipe attached to the side to supply the electrical power. We removed the conduit and plugged the hole with a threaded brass cap.
We then added the brass handle at the top of the nautical pendant light with copper deflector cover to polish it all off. All the old wiring and bulb holder was removed and new UL-Listed parts were re-installed that are rated to work with any voltage under 250 volts. The new bulb holder takes an Edison base bulb of 75 watts or less. To access the bulb, spin off the brass cage and the undamaged glass globe.
This brass hanging light with copper deflector cap will be shipped with 2 1/2 feet of chain and wire, but you will need to supply the means to attach to your ceiling.
We have 5 pieces like this in stock; however these pieces are not identical and there may be some variation between pieces.
Quantity: 5 Matched Pieces
Click on the photo to see additional views of this hanging nautical pendant light.
This hanging nautical pendant light measures about 13 inches long, from the tip of the handle to the bottom of the cage. We have added a 12 inch brass cover to complete the look and dress the light up a bit. The light has 4 feet of brass chain for hanging. Originally this light had conduit pipe attached to the side to supply the electrical power. We plugged the old conduit holes with copper caps. This light weighs just under 7 1/2 pounds.
The light has been rewired with all new UL-Listed wiring and a bulb fixture that are rated to work with any voltage under 250 volts. The new bulb holder can take an ordinary house or LED bulb of 100 watts or less.
You will be shipped a hanging nautical pendant light like what is shown in the photos.
Quantity: 9 Matched Pieces
Click on the photo to see additional views of this beautiful reclaimed polished brass pendant light.
We started out with a reclaimed brass nautical ceiling light. Once the original light was polished, we fitted it with an 8 1/4 inch wide polished brass deflector cover. The center hole on the top housing was threaded and a brass down rod was added. The down rod has a 3 1/4 inch ceiling mount plate with three mounting holes. This reclaimed polished brass pendant light will extend down from the ceiling about 14 inches and the total weight is about 4 1/2 pounds.
This reclaimed polished brass pendant light was then totally rewired with UL-Listed wiring with a ground wire and bulb holder that is rated for any voltage under 250 volts. The new bulb holder takes a common house bulb of 65 watts or less. To access the bulb, the deflector cover and undamaged glass globe spin off separately.
Great looking pendant light! When mounted, the light must point downward to avoid getting moisture inside the globe.
Please give us a call at 574-870-1571 to order this item number. And as always, shipping is free here in the continental US!
We have several pieces of this reclaimed polished brass pendant light in stock!
Quantity: 19 Pieces In Stock