Vintage Salvaged Brass Ship Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Chick on the photo to see additional views of this brass pathway nautical dock light .
This all original brass pathway nautical dock light or house light weighs about 6 pounds. From the top of the mount plate to the bottom of the cage it measures about of 10 inches. This brass pathway nautical dock light will extend out from the wall by 6 1/2 inches. The mounting surface measures 4 1/2 inches in diameter and has 3 mount holes. The cage and globe unscrew from the main housing to access the bulb holder.
We have re-wired this light, including a ground wire, and installed a new UL Listed bulb fixture that holds a normal 75 watt house bulb.
These lights have seen many years of action at sea and show some weathering.
Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Our 6 inch brass adapter plates are $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the lights at no extra charge.
Ready to get that order placed? Just give us a call at 574-870-1571. Most orders ship the same business day as ordered.
Quantity: 12 Pieces In Stock
Click on the photo to see additional views of this authentic cast brass wall mounted nautical light.
From the top of the wall mount to the bottom of the cage, this authentic cast brass bulkhead wall mounted nautical light measures about 8 1/2 inches tall. When installed, this authentic cast brass bulkhead wall mounted nautical light will extend out by 6 inches. The wall mount measures 2 7/8 inches wide x about 3 1/2 inches tall and has three mount holes. This authentic cast brass wall mounted nautical light weighs about 3 1/2 pounds, and is 100% cast brass. The glass globe is in good condition but may have a slight weathered look. You can use this light for interior or exterior projects, it will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This authentic cast brass wall mounted nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.
These nautical lights can be used on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.
These lights have been polished but will still have a slight weathered look to the brass surface.
We have been supplying lights to homeowners and design firms for over 15 years. We hand pick lights and other nautical décor items from marine salvage operations around the globe. Needs some custom work done to your lights to make them fit your one of a kind project? just ask us for a quote. Our in house shop is fully equipped to do most custom projects. Call us at 574-870-1571 and see what we can do for your dream project.
Several pieces in stock!!
Quantity: 20 Pieces In Stock
Click on the photo to see additional views of this small wall mounted cast brass passageway light.
This wall mounted cast brass passageway light weighs just a little over 3 pounds. It is 7 inches tall and when mounted to the wall it will extend out by about 5 1/2 inches. The wall mount measures just over 4 inches wide and has two mount holes.
We have re-wired this light with new wiring, plus a ground wire, and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.
One of our most common installation questions is mounting this light to an existing in the wall junction boxes. We have solved this installation problem by designing a brass adaptor plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. This makes for a clean watertight installation and provides a finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.
Quantity: 60 Pieces In Stock
Click on the photo to see additional views of this small wall mounted brass nautical light .
This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.
This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.
Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.
Quantity: 1 Pieces In Stock