USS Forrestal Nautical Bulkhead Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this 6 piece set of wall mounted vintage nautical cage lights.
Each of these wall mounted vintage nautical cage lights weigh about 5 pounds. Measuring from the top of the wall mount to the bottom of the cage, they are about 10 inches tall. The wall mount is 3 3/4 inches wide and has four mount holes. When mounted to the wall, these wall mounted vintage nautical cage lights will extend out from the mounting surface by about 6 inches. The brass cages spin on and off with just a little effort, as do the glass globes. The globes are original, so you can expect minor surface wear and each and every one may not be a just like the other 5 globes in the set.
Each of these wall mounted vintage nautical cage lights have been re-wired with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
Just one 6 piece matched set in stock, so you will be shipped the 6 lights shown. Note the weathering on these lights as they came from a real working vessel.
If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box and makes a very clean looking installation.
Just one set in stock, so you will be shipped the 6 piece wall mounted vintage nautical cage lights shown in the photos.
Quantity: 1 Six Piece Set In Stock
Click on the photo to see additional views of this small wall mounted cast brass passageway light.
This wall mounted cast brass passageway light weighs just a little over 3 pounds. It is 7 inches tall and when mounted to the wall it will extend out by about 5 1/2 inches. The wall mount measures just over 4 inches wide and has two mount holes.
We have re-wired this light with new wiring, plus a ground wire, and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.
One of our most common installation questions is mounting this light to an existing in the wall junction boxes. We have solved this installation problem by designing a brass adaptor plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. This makes for a clean watertight installation and provides a finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.
Quantity: 60 Pieces In Stock
Click on the photo to see additional views of this aluminum wall light with cover and junction box.
This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage. The aluminum rain cap cover that we added measures 8 inches in diameter. The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches. The light weighs almost 3 1/2 pounds.
We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts. It will take a normal screw-in house bulb of 75 watts or less. LED bulbs will also work.
These lights make great dock lights, boat house lights, or front door lights! Can be used inside too. Not recommended for saltwater exposure.
You will be shipped an aluminum wall light with cover and junction box like the one pictured.
Quantity: 7 Pieces In Stock
Click on the photo to see additional views of these Port and Starboard Brass Nautical Lights.
From the top of the junction box to the bottom of the cage, each light measures 10 3/4 inches tall and weighs just over 6 pounds. When mounted to the wall, these port and starboard brass nautical lights will extend out from the mounting surface by just short of 7 inches. The junction box is just under 4 1/2 inches wide.
Both lights have just been re-wired with all new UL-Listed bulb holders and wiring. The new parts are all rated to work with any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less. The glass globes are true red and green glass. To access the bulb, you spin off the brass cage and then spin off the glass globe. If your project calls for clear glass, we can change the globes out to clear glass at no cost.
These lights are made of solid brass and will never rust. They can be used for interior or exterior projects.
Ready to place that order, or just have some questions you need help with? Just give us a call at 574-870-1571 and we can help.
Just one pair in stock so you will be shipped the port and starboard brass bulkhead nautical lights shown in the photos.
Quantity: 1 Pair In Stock