Small Wall Mounted Nautical Passageway Light
Quantity: 55 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this 2 Piece set of authentic Port and Starboard bulkhead nautical lights from the 1950’s.
This two piece set of authentic port and starboard bulkhead nautical lights is an excellent option for dock lights, seawall lights, or even interior or exterior lighting. They measure 9 1/2 inches from the top of the mount plate to the base of the cage. The wall mount measures 3 3/4 inches wide with three mount lugs on the outside edge. When mounted to wall this two piece set of authentic port and starboard bulkhead nautical lights will extend out 6 1/2 inches. Each light weighs about five pounds.
This pair comes with glass globes in the port and starboard colors (red & green). If your project calls for clear globes, we can change the globes to standard clear for no charge. These lights have been re-wired and a new UL Listed parts. They will work on any voltage under 250 volts and a normal screw in house bulb of 60 watts or less will work. They are ready to install right out of the box.
Talk to us about our new brass adaptor plate that will end all of your installation problems with almost any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the lights.
Only one pair, so you will be shipped the authentic port and starboard bulkhead nautical lights shown in the photos.
Quantity: 1 Pair in stock
Click on the photo to see additional views of these Port and Starboard Brass Nautical Lights.
From the top of the junction box to the bottom of the cage, each light measures 10 3/4 inches tall and weighs just over 6 pounds. When mounted to the wall, these port and starboard brass nautical lights will extend out from the mounting surface by just short of 7 inches. The junction box is just under 4 1/2 inches wide.
Both lights have just been re-wired with all new UL-Listed bulb holders and wiring. The new parts are all rated to work with any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less. The glass globes are true red and green glass. To access the bulb, you spin off the brass cage and then spin off the glass globe. If your project calls for clear glass, we can change the globes out to clear glass at no cost.
These lights are made of solid brass and will never rust. They can be used for interior or exterior projects.
Ready to place that order, or just have some questions you need help with? Just give us a call at 574-870-1571 and we can help.
Just one pair in stock so you will be shipped the port and starboard brass bulkhead nautical lights shown in the photos.
Quantity: 1 Pair In Stock
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock