Small Maritime Cast Brass Passageway Light
Quantity: 9 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this 4 piece set of authentic wall mounted nautical brass lights.
These authentic wall mounted brass lights each measures about 10 inches long. The wall mount is 3 3/4 inches in diameter and has four mount holes. When mounted to the wall, these lights will extend out from the mounting surface by about 6 inches. Each light weighs about 6 pounds.
All lights have been re-wired with new Westinghouse Electrical parts. These parts are UL listed and rated to work with any voltage under 250 volts. New ground wires have also been installed. The new bulb sockets take a normal screw in house bulb of 75 watts or less.
If you have an existing junction box in the mounting surface, this light may require one of our specially designed brass adaptor plates that are an additional $20.00 each. If ordered with the lights, we will install them for you.
You will be shipped the authentic wall mounted nautical brass lights shown in the photos.
Quantity: 1 Four Piece Set In Stock
Click on the photo to see additional views of the Port & Starboard Nautical Bulkhead Lights w/Brass Cover.
This is a matched pair of port & starboard nautical bulkhead lights w/brass cover. The globes are true red and green glass. From the top of the wall mount to the bottom of the cage, these port & starboard nautical bulkhead lights w/brass cover measures 11 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this pair of port & starboard nautical bulkhead lights w/brass cover will extend out from the wall by 8 inches. Each light weighs over 5 pounds, and is 100% cast brass. You can use these port & starboard nautical bulkhead lights w/brass cover inside or outside, they will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock
Click on the photo to see additional views of this aluminum wall light with cover and junction box.
This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage. The aluminum rain cap cover that we added measures 8 inches in diameter. The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches. The light weighs almost 3 1/2 pounds.
We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts. It will take a normal screw-in house bulb of 75 watts or less. LED bulbs will also work.
These lights make great dock lights, boat house lights, or front door lights! Can be used inside too. Not recommended for saltwater exposure.
You will be shipped an aluminum wall light with cover and junction box like the one pictured.
Quantity: 7 Pieces In Stock
Chick on the photo to see additional views of this brass nautical dock light .
From the top of the mount plate to the bottom of the cage this brass nautical dock light measures about 11 1/2 inches long. It will extend out from the wall by about 5 inches. The mount plate measures 4 1/2 inches in diameter with four mount holes. The light weighs 4 pounds.
We have re-wired this light, including a ground wire, with all new UL Listed parts that holds a normal 75 watt house bulb and up to 250 volts. The cage and globe unscrew from the main housing to access the bulb holder. The cage is faintly marked “Pauluhn” on one side.
Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Our 6 inch brass adapter plate is $20.00. If you order one at the same time you order this light, we will attach the plate at no extra charge.
One piece in stock – you will be shipped the brass nautical dock light shown in the photos.
Quantity: 1 Piece In Stock