Small Cast Brass Bulkhead Light
Quantity: 11 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional photos of this antique brass bulkhead light.
From the top of the wall mount of this antique brass bulkhead light with copper rain cap to the bottom of the cage, this light measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this antique brass bulkhead light will extend out from the wall by 8 inches. This light weighs over 5 pounds, and is 100% cast brass.
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
This antique brass bulkhead light makes great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
Quantity: 10 Matched Pieces In Stock
Click on the photo to see additional views of this small wall mounted cast brass passageway light.
This wall mounted cast brass passageway light weighs just a little over 3 pounds. It is 7 inches tall and when mounted to the wall it will extend out by about 5 1/2 inches. The wall mount measures just over 4 inches wide and has two mount holes.
We have re-wired this light with new wiring, plus a ground wire, and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.
One of our most common installation questions is mounting this light to an existing in the wall junction boxes. We have solved this installation problem by designing a brass adaptor plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. This makes for a clean watertight installation and provides a finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.
Quantity: 60 Pieces In Stock
Click on the photo to see additional views of this aluminum wall light with cover and junction box.
This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage. The aluminum rain cap cover that we added measures 8 inches in diameter. The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches. The light weighs almost 3 1/2 pounds.
We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts. It will take a normal screw-in house bulb of 75 watts or less. LED bulbs will also work.
These lights make great dock lights, boat house lights, or front door lights! Can be used inside too. Not recommended for saltwater exposure.
You will be shipped an aluminum wall light with cover and junction box like the one pictured.
Quantity: 17 Pieces In Stock
Click on the photo to see additional views of this 6 piece set of authentic cast brass bulkhead nautical lights.
From the top of the wall mount to the bottom of the cage, each light in this set measures about 9 1/2 inches tall. The lights in this 6 piece set of authentic cast brass bulkhead nautical lights have wall mounts that measure about 3 5/8 inches in diameter with four mount holes. When mounted to the wall, these lights will extend out by 6 inches. Each light in this six piece set weighs about 5 1/2 pounds.
Each light has been re-wired with new Westinghouse electrical parts that are UL-listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
If your project is near saltwater, these are a perfect choice because they are constructed of 100% cast brass material and they will never rust!
Talk to us about our new brass adaptor plate that will end all of your installation problems with your standard junction box. Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to each light with brass screws and nuts.
Ready to get that order placed? Just give us a call at 574-870-1571 and we can get things started!
You will be shipped the 6 piece set of authentic cast brass bulkhead nautical lights shown in the photos.