Port and Starboard Bulkhead Lights With Copper Cover
Quantity: 1 Pairs In Stock
Free Shipping in the continental US
Click on the photo to see additional views of these Port & Starboard nautical wall lights with junction boxes.
From the top of the wall mount to the bottom of the cage these Port & Starboard bulkhead nautical wall lights with junction boxes measure about 11 inches tall. The copper rain cap cover that we added measures 8 inches in diameter and has a rolled outside edge. The two wall mount lugs on the backside of the brass junction box are 5 inches on center of each other.
When mounted to the wall these Port & Starboard nautical wall lights with junction boxes will extend out from the wall by 10 inches. Each light in this set weighs over 8 pounds, and is 100% cast brass. The globes are true red and green glass – not painted.
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, the cages unscrew from the fixture.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
Quantity: 5 Pairs In Stock
Click on the photo to see additional views of this vintage brass oceanic bulkhead light.
This vintage brass oceanic bulkhead light is about 11 inches tall. The junction box is 4 1/4 inches wide with two mounting lugs. This light is going to extend out from the wall by about 6 1/2 inches when mounted. The light manufacturer’s name, “OCEANIC” is cast into the cage of the light.
This vintage brass oceanic bulkhead light has been run through our shop where it was totally rewired with all new UL-Listed wiring and bulb socket. Our new wiring is rated for any voltage under 250 volts, and has a pre-installed ground wire so it can be installed in a wet location. The new bulb socket accepts a common screw in house bulb of 75 watts or less. To access the bulb, you just spin off the cage and then spin off the undamaged glass globe.
Quantity: 15 Pieces In Stock
Click on the photo to see additional views of this 6 piece set of solid cast brass nautical lights.
Each light measures about 10 inches long – from top of mount plate to bottom of cage.
Wall mount measures 3 3/4 inches in diameter.
Extends out from the wall by 6 inches.
Each light weighs about 5 pounds.
The lights in this 6 piece set of solid cast brass nautical lights have been re-wired, including ground wires, with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
This light may require one of our specially designed brass adaptor plates that are $20.00 each. Our adaptor plate covers the area over the junction box and gives a more finished look.
You will be shipped the 6 piece set of solid cast brass nautical lights shown in the photos.
Quantity: 1 Six Piece Set In Stock
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock