Polished Aluminum Bulkhead Light
Quantity: 22 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of this 6 piece set of solid cast brass nautical lights.
Each light measures about 10 inches long – from top of mount plate to bottom of cage.
Wall mount measures 3 3/4 inches in diameter.
Extends out from the wall by 6 inches.
Each light weighs about 5 pounds.
The lights in this 6 piece set of solid cast brass nautical lights have been re-wired, including ground wires, with new Westinghouse Electrical parts that are UL-Listed and rated to work with any voltage under 250 volts. The new bulb holders take a normal screw in house bulb of 75 watts or less.
This light may require one of our specially designed brass adaptor plates that are $20.00 each. Our adaptor plate covers the area over the junction box and gives a more finished look.
You will be shipped the 6 piece set of solid cast brass nautical lights shown in the photos.
Quantity: 1 Six Piece Set In Stock
Click on the photo to see additional views of this 2 Piece set of authentic Port and Starboard bulkhead nautical lights from the 1950’s.
This two piece set of authentic port and starboard bulkhead nautical lights is an excellent option for dock lights, seawall lights, or even interior or exterior lighting. They measure 9 1/2 inches from the top of the mount plate to the base of the cage. The wall mount measures 3 3/4 inches wide with three mount lugs on the outside edge. When mounted to wall this two piece set of authentic port and starboard bulkhead nautical lights will extend out 6 1/2 inches. Each light weighs about five pounds.
This pair comes with glass globes in the port and starboard colors (red & green). If your project calls for clear globes, we can change the globes to standard clear for no charge. These lights have been re-wired and a new UL Listed parts. They will work on any voltage under 250 volts and a normal screw in house bulb of 60 watts or less will work. They are ready to install right out of the box.
Talk to us about our new brass adaptor plate that will end all of your installation problems with almost any existing in the wall junction box. Your electrician will love you if you add our custom built adaptor plate to this light! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your lights, we will attach the plates to the lights.
Only one pair, so you will be shipped the authentic port and starboard bulkhead nautical lights shown in the photos.
Quantity: 1 Pair in stock
Click on the photo to see additional views of these Port and Starboard Bulkhead Lights With Copper Cover.
This is a matched pair of cast brass port and starboard bulkhead lights with copper cover. From the top of the wall mount to the bottom of the cage, both port and starboard bulkhead lights with copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this light will extend out from the wall by 8 inches. Each port and starboard bulkhead light with copper cover in this set weighs over 5 pounds, and is 100% cast brass (except the covers).
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock