Polished Aluminum Art Deco Ship Light
Quantity: 6 Pieces In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this aluminum wall light with cover and junction box.
This aluminum wall light with cover and junction box measures 12 inches tall, from the top of the junction box down to the tip of the cage. The aluminum rain cap cover that we added measures 8 inches in diameter. The junction box on the light measures 4 3/8 inches in diameter, and the two mounting lugs extend out and make it 6 1/4 inches. When mounted to the wall, this light will extend out by 11 inches. The light weighs almost 3 1/2 pounds.
We have installed a new Westinghouse UL-Listed bulb fixture and wiring that is rated for up to 250 volts. It will take a normal screw-in house bulb of 75 watts or less. LED bulbs will also work.
These lights make great dock lights, boat house lights, or front door lights! Can be used inside too. Not recommended for saltwater exposure.
You will be shipped an aluminum wall light with cover and junction box like the one pictured.
Quantity: 7 Pieces In Stock
Click on the photo to see additional views of this small wall mounted nautical passageway light.
This small wall mounted nautical passageway light is made of cast brass, and weighs just over over 3 pounds. It is 7 inches long and when mounted to the wall it will extend out by 5 inches. The wall mount measures just over 4 3/4 inches wide and has two mount holes. To access the bulb fixture, unscrew the cage. The glass globe lifts out.
This light has all new wiring, including a ground wire, and a new UL Listed bulb fixture that holds a normal 65 watt house bulb or less. Rated for any voltage under 250 volts.
We have designed a brass adaptor plate that mounts to the back of the light. The plate is 6 inches in diameter and is brass, and will cover nearly any American in the wall junction box. This makes for a clean installation and provides a more finished look. The plates are $20 each and if you order the plate with your light, we will attach it at no extra charge.
Quantity: 55 Pieces In Stock
Click on the photo to see additional views of this solid brass small nautical bulkhead light .
From the top of the wall mount to the bottom of the cage, this light measures about 9 inches long. The wall mount is 3 3/4 inches in diameter and has four mount holes. The light will extend out from the wall about 6 inches. To access the bulb area, the brass cage spins off and the undamaged glass globe lifts out. Weighs about 5 pounds.
We have installed a new bulb holder and wiring that is UL-Listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 50 watts or less. Wired to work with any voltage under 250 volts. Great for interior and exterior projects! These lights have some light surface wear.
If you have an existing junction box in your mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box for a very clean looking installation. If you order a plate when you order the light, we will install it on the light at no extra charge.
Quantity: 39 Pieces In Stock
Click on the photo to see additional views of this small wall mounted brass nautical light .
This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.
This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.
Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.
Quantity: 1 Pieces In Stock