Brass Oceanic Nautical Dock Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock
Click on the photo to see additional views of this authentic Oceanic cast brass wall light.
From the top of the wall mount to the bottom of the cage this authentic Oceanic cast brass wall light measures 11 inches long. The wall mount is 4 1/2 inches in diameter and has four mount holes. This light will extend out from the wall by 5 inches. The cage is prominently marked “Oceanic”. Light weighs 4 1/2 pounds.
You can use this light inside or out – it will never rust! We have rewired this light to include a ground wire. We have also installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. The new bulb holder takes a common screw in house bulb of 75 watts or less.
You will be shipped this authentic Oceanic cast brass wall light shown in the photos.
Quantity: 1 Piece In Stock
Click on the photo to see additional views of this small wall mounted cast brass passageway light.
This wall mounted cast brass passageway light weighs just a little over 3 pounds. It is 7 inches tall and when mounted to the wall it will extend out by about 5 1/2 inches. The wall mount measures just over 4 inches wide and has two mount holes.
We have re-wired this light with new wiring, plus a ground wire, and installed a new UL Listed bulb fixture that holds a normal 65 watt house bulb. All of our new wiring and bulb holders are rated for any voltage under 250 volts.
One of our most common installation questions is mounting this light to an existing in the wall junction boxes. We have solved this installation problem by designing a brass adaptor plate that mounts to the back of the light. The plate is 6 inches wide and will cover any American in the wall junction box. This makes for a clean watertight installation and provides a finished look. These plates add $20.00 to each light. Order the plate when you order your light, and we will attach the plate to the light at no extra charge.
Quantity: 60 Pieces In Stock
Click on the photo to see additional views of the Port & Starboard Nautical Bulkhead Lights w/Brass Cover.
This is a matched pair of port & starboard nautical bulkhead lights w/brass cover. The globes are true red and green glass. From the top of the wall mount to the bottom of the cage, these port & starboard nautical bulkhead lights w/brass cover measures 11 inches tall. The brass rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this pair of port & starboard nautical bulkhead lights w/brass cover will extend out from the wall by 8 inches. Each light weighs over 5 pounds, and is 100% cast brass. You can use these port & starboard nautical bulkhead lights w/brass cover inside or outside, they will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap deflector cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock