Authentic Nautical Salvaged Ship Light
Quantity: 1 Piece In Stock
Free Shipping in the continental US
Click on the photo to see additional views of the oceanic brass wall light with junction box.
From the top of the junction box to the bottom of the cage, this oceanic brass wall light measures 10 1/2 inches tall. When mounted to the wall, this oceanic brass wall light with brass junction box will extend out from the wall by 6 inches. This nautical wall light with brass junction box weighs about 8 pounds, and is 100% cast brass.
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe.
These lights make great dock lights, boat house lights, front door lights, and they have many interior lighting uses!
Quantity: 21 Pieces In Stock
Click on the photo to see additional views of this small wall mounted brass nautical light .
This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.
This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.
Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.
Quantity: 1 Pieces In Stock
Click on the photo to see additional views of these Port and Starboard Brass Nautical Lights.
From the top of the junction box to the bottom of the cage, each light measures 10 3/4 inches tall and weighs just over 6 pounds. When mounted to the wall, these port and starboard brass nautical lights will extend out from the mounting surface by just short of 7 inches. The junction box is just under 4 1/2 inches wide.
Both lights have just been re-wired with all new UL-Listed bulb holders and wiring. The new parts are all rated to work with any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less. The glass globes are true red and green glass. To access the bulb, you spin off the brass cage and then spin off the glass globe. If your project calls for clear glass, we can change the globes out to clear glass at no cost.
These lights are made of solid brass and will never rust. They can be used for interior or exterior projects.
Ready to place that order, or just have some questions you need help with? Just give us a call at 574-870-1571 and we can help.
Just one pair in stock so you will be shipped the port and starboard brass bulkhead nautical lights shown in the photos.
Quantity: 1 Pair In Stock
Click on the photo to see additional views of this brass wall light with arm.
This is a brass wall light with arm. We’ve also added a 10 inch brass cover to dress it up a little. The light measures a total of about 12 inches long and will extend down about 7 inches. The triangular mount plate measures 3 inches on each side. There are three mount holes. Because this mount plate will not cover most standard junction boxes, we recommend adding our 6 inch brass plate for an additional $20 each. The light weighs just over 4 1/2 pounds.
This light has been re-wired, including a ground wire, with an all new bulb fixture. All electrical parts we install are UL-listed and rated to work with any voltage under 250 volts. The bulb holder takes a 75 watt or less common screw-in house bulb.
Several pieces in stock.
Quantity: 19 Pieces In Stock