6 Piece Set Of Solid Cast Brass Nautical Lights
Quantity: 1 Six Piece Set In Stock
Free Shipping in the continental US
Click on the photo to see additional views of this small wall mounted brass nautical light .
This small wall mounted brass nautical light is commonly referred to as bulkhead light or passageway light. This light is a little smaller than most of our bulkhead lights. When mounted to the wall this small wall mounted brass nautical light will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This small wall mounted brass nautical light measures 7 1/2 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, you spin off the cage and the undamaged glass globe drops out.
This light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects.
This is the real deal! Salvaged by our crew from a vessel being cut up for scrap. Because these lights came from a real working vessel they may have minor surface wear and minor dents and dings. As you can see from the attached photos, they are nice looking lights.
Talk to us about our new brass adaptor plate that will end all of your installation problems when trying to mount vintage nautical lighting to an existing in the wall junction box. Your electrician will love it if you add our custom built adaptor plate to these lights! Our 6 inch brass adaptor plates cost $20.00 each. If you order them at the same time you order your vintage nautical lighting, we will predrill the mounting holes and attach the plates to each lights with brass screws and nuts.
Quantity: 1 Pieces In Stock
Click on the photo to see additional views of this authentic cast brass wall mounted nautical light.
From the top of the wall mount to the bottom of the cage, this authentic cast brass bulkhead wall mounted nautical light measures about 8 1/2 inches tall. When installed, this authentic cast brass bulkhead wall mounted nautical light will extend out by 6 inches. The wall mount measures 2 7/8 inches wide x about 3 1/2 inches tall and has three mount holes. This authentic cast brass wall mounted nautical light weighs about 3 1/2 pounds, and is 100% cast brass. The glass globe is in good condition but may have a slight weathered look. You can use this light for interior or exterior projects, it will never rust!
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This authentic cast brass wall mounted nautical light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then remove the glass globe.
These nautical lights can be used on either side of a door entrance, on the garage, in bathrooms, hallways, and many other applications.
These lights have been polished but will still have a slight weathered look to the brass surface.
We have been supplying lights to homeowners and design firms for over 15 years. We hand pick lights and other nautical décor items from marine salvage operations around the globe. Needs some custom work done to your lights to make them fit your one of a kind project? just ask us for a quote. Our in house shop is fully equipped to do most custom projects. Call us at 574-870-1571 and see what we can do for your dream project.
Several pieces in stock!!
Quantity: 20 Pieces In Stock
Click on the photo to see additional views of this solid brass small nautical bulkhead light .
From the top of the wall mount to the bottom of the cage, this light measures about 9 inches long. The wall mount is 3 3/4 inches in diameter and has four mount holes. The light will extend out from the wall about 6 inches. To access the bulb area, the brass cage spins off and the undamaged glass globe lifts out. Weighs about 5 pounds.
We have installed a new bulb holder and wiring that is UL-Listed and made by Westinghouse Electric. The bulb holder takes a normal screw in house bulb of 50 watts or less. Wired to work with any voltage under 250 volts. Great for interior and exterior projects! These lights have some light surface wear.
If you have an existing junction box in your mounting surface, this light may require one of our specially designed brass adaptor plates that we sell for $20.00 each. Our adaptor plate will make a water tight connection over the junction box for a very clean looking installation. If you order a plate when you order the light, we will install it on the light at no extra charge.
Quantity: 40 Pieces In Stock
Click on the photo to see additional views of these Port and Starboard Bulkhead Lights With Copper Cover.
This is a matched pair of cast brass port and starboard bulkhead lights with copper cover. From the top of the wall mount to the bottom of the cage, both port and starboard bulkhead lights with copper cover measures 11 inches tall. The copper rain cap cover that we added measures 8 inches wide and now has a rolled outside edge. The wall mount measures 4 3/8 inches wide and has four screw holes. When mounted to the wall, this light will extend out from the wall by 8 inches. Each port and starboard bulkhead light with copper cover in this set weighs over 5 pounds, and is 100% cast brass (except the covers).
We have installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts. This light takes a normal screw in house bulb of 75 watts or less. To access the bulb, you unscrew the brass cage and then unscrew the glass globe. We also stock replacement glass globes for these lights, so no need to worry about broken globes down the road. This light has some original parts and some recast parts made from other broken lights.
We take great pride in this light design. We have made a new rubber gasket to fit above the rain cap cover and a second new rubber gasket has been added to the inside housing where the globe screws in. This greatly reduces if not ends the problem with bugs and water collecting inside the globe area!
Quantity: 1 Pairs In Stock